Home Network Community > Deco > Deco X50/X55 V1 1.5.5 Optimize The Overall App Experience / Network stability
< Deco

Official Release Deco X50/X55 V1 1.5.5 Optimize The Overall App Experience / Network stability

123...

Official Release Deco X50/X55 V1 1.5.5 Optimize The Overall App Experience / Network stability

Official ReleaseDeco X50/X55 V1 1.5.5 Optimize The Overall App Experience / Network stability
Deco X50/X55 V1 1.5.5 Optimize The Overall App Experience / Network stability
2024-07-04 03:30:24 - last edited 2024-09-30 09:14:00
Tags: #Firmware Update #Network Connectivity #Official

This Article applied to:

Deco X50/X55_V1/1.6_1.5.1/1.5.0

 

 

Firmware Download Link:

Deco X50_V1/1.6 1.5.5_build_20240718 (Official Version)

Deco X55_V1/1.6

 1.5.5_build_20240718 (Official Version)

Update Advice:

1. Please make sure the Deco APP is up-to-date.

2. How to manually update the firmware via web UI- How to Update the Firmware of Deco.

 

 

Modifications and Improvement

1. Supported configuring IPv6 during setup.
2. Added the low-power feature.
3. Enhanced the VPN performance.
4. LED schedule feature supported control of individual device LEDs.

5. Improved the overall Deco App experience, especially with the online client list status.
6. Increased networking number.
7. Enhanced the system security.

 

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  0      
 
  0      
 
#1
Options
146 Reply
Re:Optimize The Overall App Experience/Network stability on Deco X50/X55_V1
2024-07-05 16:53:43

  @David-TP so this is a new build of 1.5.1? Should I better wait untill this build is officially released and pushed throughout Deco app? Because of the issues like not obtaining IP-adresses, in the old 1.5.1 version.. 

  0  
  0  
#2
Options
Re:Optimize The Overall App Experience/Network stability on Deco X50/X55_V1
2024-07-08 11:43:12

  @JanRekenaar 

Hi, yes, the new build is a beta version to improve the current reported issue on the official 1.5.1.

If the official 1.5.0 build 0417 works well on your Deco, I think you could wait for the official version later.

Thank you very much and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  0  
  0  
#3
Options
Re:Optimize The Overall App Experience/Network stability on Deco X50/X55_V1
2024-07-08 19:28:25

  @David-TP 

 

I have doownloaded and installed on my Deco X55 v1.0 but the files and the web gui show a different version than what is listed above. When I download the firmware it shows as "20240605-rel44380" and not "20240701 build"- am i doing something wrong?

 

  1  
  1  
#4
Options
Re:Optimize The Overall App Experience/Network stability on Deco X50/X55_V1
2024-07-09 06:26:43 - last edited 2024-07-10 03:21:12

  @Loon926xx 

Hi, Thank you very much for the notification. You didn't do anything wrong but I didblush.

I used the firmware uploading date instead of the firmware release build.

Is the beta firmware working as expected so far?

Wait for your reply and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  0  
  0  
#5
Options
Re:Optimize The Overall App Experience/Network stability on Deco X50/X55_V1
2024-07-10 02:53:30

  @David-TP 

 

Thank you David

I would say it's better, especially the "unable to find deco" error after my mobile screen locks and i try to get back to the app.

The app will now let me modify connection preferences for non-roaming devices but it doesn't seem to want to enforce it.

Still a few devices that are connected and online via wifi that the app doesn't list with the wifi icon

Still getting a number of drops and slow internet often as well as a lot of errors in the logs about multicast igmp addresses

Havent had a chance yet to try VPN, QOS, or any guest/iot features (which basically doesn't seem tyo do much anyway)

The only way to seem to be able to use NAT Forwarding reliably seems to be by using upnp but there is no way to be able to see which clients have opened ports.

 

Just my initial impression.. 

 

  2  
  2  
#6
Options
Re:Optimize The Overall App Experience/Network stability on Deco X50/X55_V1
2024-07-25 10:35:29

  @David-TP Is this firmware also good to install on the X50 Outdoor? I have an issue that the app somehow does not list my devices in the "Online clients" list while they are actually online. I can visit them in my browser by their networkname "myname.local"  and on my Windows machine they show up when I do "arp -a". They have a dynamic addresses given to them by the main Deco DHCP server.

  1  
  1  
#7
Options
Re:Optimize The Overall App Experience/Network stability on Deco X50/X55_V1
2024-07-25 22:53:41

  @David-TP the firmware works ok for two days, but then the same issue occurred .  Most device are not showing online.  The only online devices are the four TP-Link smart switches i have added to the deco app.

  2  
  2  
#8
Options
Re:Optimize The Overall App Experience/Network stability on Deco X50/X55_V1
2024-07-28 16:07:32

  @David-TP I installed the BETA version two days ago and so far the issues about disappearing devices seems to be solved.
Is this firmware updating to the next official release once available or do I have to do manual steps?

  1  
  1  
#9
Options
Re:Optimize The Overall App Experience/Network stability on Deco X50/X55_V1
2024-08-01 16:19:13

Hi  @David-TP ,
I updated on June 28th, with Firmware 1.5.1 Build 20240417 Release 52783

(X50v1_en_1.5.1 Build 20240417 Rel. 52783_US_EU_JP_CA_up.bin)

 



Today I check if there is a new firmware on the Web, and found that Firmware 1.5.1 dissapear from all the TP-link sites.

What happened?

 

  0  
  0  
#10
Options
Re:Optimize The Overall App Experience/Network stability on Deco X50/X55_V1
2024-08-02 01:50:58

  @JPNARF 

@SpaceWalker73 

Thank you very much for your time and patience.

The previous 1.5.1 has been removed from the official websites for further optimization.

And a new version 1.5.5 is in the release process. It could be detected on the Deco APP as early as next week.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  1  
  1  
#11
Options
123...

Information

Helpful: 0

Views: 16973

Replies: 146

Tags

Firmware Update Network Connectivity Official
Related Articles
 Optimize The Overall App Experience on Deco XE5300/XE75/XE75 Pro
10927 6
 ECO Mode on Deco X50/Deco X55
3264 3
X50 Deco wifi unstable and slow connection after update 1.5.5
216 1
X50 Deco's no internet after firmware 1.5.5 update
1314 5
 Deco BE85/BE95_1.0.18 Optimizes the Overall Network Speed and Stability.
6031 1
 Improve Network Status and APP Control on Deco X50/X55
2527 3
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.