Official Release Deco X50/X55_V1_1.5.5 Support WireGuard VPN, Client Speed Limit and Fixed WAN Port
This Article Applied to
Deco X50/X55_V1_1.4.1
Firmware Modifications
1. Support WireGuard VPN Server/Client.
2. Support built-in easy configuration of NordVPN/Surfshark VPN.
Note: In compliance with local regulations, the Third-party VPN feature may be restricted in specific regions.
3. Add client speed limit under clients' detailed setting page.
4. Support Fixing the WAN port under Deco APP>More>Advanced>WAN Port.
5. Add Scene Priority under QOS.
6. Add Client MAC Identification to improve the accuracy of device detection.
7. Add more device icons in the Deco APP.
Download Link
| Deco X50_V1 | Deco X50_V1_1.5.5- updated 2024.8.12 |
| Deco X55_V1 | Deco X55_V1_1.5.5- updated 2024.8.12 |
Note:
1. *According to the user feedback and our further test, this 1.5.1 version does not support reverting to 1.4.1 via downgrade firmware recovery directly.
-Ever since 1.3.0, the firmware bin file has been over 32MB which passes the maximum file size of the HTTP uboot upgrade tool. So if you want to revert to 1.4.1, please refer to the following suggestions:
- Still run a firmware recovery on one of the satellites Deco X50 first.
- Try to upload an older official version, 1.2.2_Build_230301.zip for example,
- Then update to 1.4.1 from 1.2.2 via web UI.
- If this process works for the satellite Deco X50, We could repeat it on the main Deco later.
2. Please make sure the Deco APP is up-to-date.
3. Some features might not be available when there are other models in the Mesh network.
Configuration Procedure for the Newly-added Features
WireGuard VPN Server& Client
NordVPN/Surfshark VPN
-
NordVPN
-
Surfshark
Client Speed Limit
Manual Selection of the WAN Port
Set Scene Priority under QOS
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi!
The devices that are failing:
- Samsung Smart Monitor M5
- Samsung TV S90C OLED
Both when I change to 80 Mhz are able to connect!
And one more information:
- tested with router AX53, and same issue!
- Copy Link
- Report Inappropriate Content
@DonS2001 Hi, welcome to the community.
This beta firmware couldn't apply to Deco X55_V1.2. But this beta test works well, the similar firmware will be soon rolled out to other Deco models.
Best regards.
Hi, I found one old post with the similar issue 160mhz on Samsung devices-273396. In the meantime, I found other users discussed the similar issue on Reddit-JaggerXXVIII .
The 160Mhz often uses several DFS channels that are also used by radar systems, such as weather, military, and airport radars. To avoid interfering with these systems, Routers tend to switch to another channel if they detect the presence of radar signals. Wireless NIC manufacturers or software coders might disable these channels in the mobile devices to mitigate liability. I think this issue is more due to the mobile devices themselves.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
@David-TP Could someone who has tried the new VPN WireGuard protocol on the router in client mode kindly share their experience? What is the maximum download and upload speed achieved? Is the connection stable? I ask this, among other things, because in my case, with the Deco X55 configured in server mode, the maximum speed I reach when connecting from outside the house barely reaches 15-20 MB out of the 600 MB I have contracted, understanding that it may be due to hardware limitations preventing faster speeds. Thank you very much.
- Copy Link
- Report Inappropriate Content
@Whitesnake
My subscribed speed is 500Mbps down/ 100Mbps up, not fantastic pings, but can nearly achieve close to max speed.
Running on free ProtonVPN, setup with Wireguard
- Copy Link
- Report Inappropriate Content
Hi @David-TP ,
I have Deco x50 v1.30 - are there also plan to add wireguard on this hardware version?
Thank you!
- Copy Link
- Report Inappropriate Content
@David-TP I have a question regards the new speed limiter. I've limited my PS5 to 20dl but when downloading a PS5 game the device itself within the deco app shows it's using all my 70mb dl bandwidth.
Is the 20mb down limit I have set not working?
- Copy Link
- Report Inappropriate Content
Hi, It looks like so. Are you able to constantly reproduce this issue?
If yes, I would like to follow up on your case via email and hope the engineer could help us locate the problem.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi everyone,
upgraded to beta firmware on my 2 Deco X50 EU v1. Users have random disconnections since the upgrade and decided to roll back ( Downgrade ).
Downloaded the Deco X50_V1_1.3.1_230824 and Deco_X50_1.0_1.4.1_20231122_US_EU_CA_JP , set the deco to Firmware recovery , used 192.168.0.1 tp upload the firmware but after 5" of upload i received the following message
Caption
I've double checked the tag under the device , it writes Deco X50 EU v1.0. Both firmware files tried are correct.
Can you please help downgrade?
- Copy Link
- Report Inappropriate Content
After setting the limit on the wired connection, the speed did not change. but over time it fell below the limit (50мбит=>9.5mbit). and QOS also does not prioritize streaming when fully loaded 100mbit link/100mbit xbox download (Both device and scenarios)
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 34629
Replies: 196
Voters 1
