Official Release Deco X50/X55_V1_1.5.1 Support WireGuard VPN, Client Speed Limit and Fixed WAN Port
This Article Applied to
Deco X50/X55_V1_1.4.1
Firmware Modifications
1. Support WireGuard VPN Server/Client.
2. Support built-in easy configuration of NordVPN/Surfshark VPN.
Note: In compliance with local regulations, the Third-party VPN feature may be restricted in specific regions.
3. Add client speed limit under clients' detailed setting page.
4. Support Fixing the WAN port under Deco APP>More>Advanced>WAN Port.
5. Add Scene Priority under QOS.
6. Add Client MAC Identification to improve the accuracy of device detection.
7. Add more device icons in the Deco APP.
Download Link
| Deco X50_V1 | Deco X50_V1_1.5.5- updated 2024.8.12 |
| Deco X55_V1 | Deco X55_V1_1.5.5- updated 2024.8.12 |
Note:
1. *According to the user feedback and our further test, this 1.5.1 version does not support reverting to 1.4.1 via downgrade firmware recovery directly.
-Ever since 1.3.0, the firmware bin file has been over 32MB which passes the maximum file size of the HTTP uboot upgrade tool. So if you want to revert to 1.4.1, please refer to the following suggestions:
- Still run a firmware recovery on one of the satellites Deco X50 first.
- Try to upload an older official version, 1.2.2_Build_230301.zip for example,
- Then update to 1.4.1 from 1.2.2 via web UI.
- If this process works for the satellite Deco X50, We could repeat it on the main Deco later.
2. Please make sure the Deco APP is up-to-date.
3. Some features might not be available when there are other models in the Mesh network.
Configuration Procedure for the Newly-added Features
WireGuard VPN Server& Client
NordVPN/Surfshark VPN
-
NordVPN
-
Surfshark
Client Speed Limit
Manual Selection of the WAN Port
Set Scene Priority under QOS
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I am running 3x Deco X50 v1 with 1.50 build 20240222, but I can not update to any other version.
The web interface says after the upload operation successful and then nothing happens
i tried update to 1.4.2, 1.0 and the newer 1.50
Today I did a factory reset of the Deco's and tried to update without any additional configuration but same result.
The 20240222 build is very unstable and loses internet connection for a couple of minutes multiple times a day.
- Copy Link
- Report Inappropriate Content
@Mel-B For me, it only worked via LAN. It doesn't work via WLAN because it's too unstable.
- Copy Link
- Report Inappropriate Content
@Ulbi thanks
but I tried it with a LAN connection from MS Edge and Chrome.
the cable was connected to a slave X50 but with a Ethernet backhaul.
Maybe a connection from the laptop to the main deco makes a difference?
- Copy Link
- Report Inappropriate Content
@Mel-B I did it from a computer that hangs directly on the main deco
- Copy Link
- Report Inappropriate Content
@Ulbi These devices acting very strange.
The update is now working from an iPhone with a WiFi Connection to a slave deco.
- Copy Link
- Report Inappropriate Content
Hi, It depends. Sometimes, I also notice that the Deco app takes a while to respond. However, this shouldn't be a common occurrence.
If you are constantly experiencing this issue, it would be highly appreciated if you could record a video clip and help me submit the APP log here:
(please remember to tick "Add system logs")
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
Is there a difference in the new firmware you attached to the opening post and the (lower) version you send me via mail?
- Copy Link
- Report Inappropriate Content
Hi, The 0407 beta in the email is the first beta firmware trying to locate the problem and modify the potential settings that might be relevant to the stability issue.
The 0408 beta here is an improved version according to the user feedback on 0407.
There isn't a huge difference between these two versions. However, it would be great to update to the latest 0408 version.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
@David-TP Thank you for your response. I will upgrade to the latest version and if I find anything I will report back here.
- Copy Link
- Report Inappropriate Content
@David-TP I sent you the protocols. I recorded a video, but I couldn't attach it.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 29446
Replies: 194
Voters 1
