Deco xe75pro smartDHCP doesn't disable on 6Ghz band

Deco xe75pro smartDHCP doesn't disable on 6Ghz band

Deco xe75pro smartDHCP doesn't disable on 6Ghz band
Deco xe75pro smartDHCP doesn't disable on 6Ghz band
2024-03-09 12:31:06
Model: Deco XE75 Pro  
Hardware Version: V2
Firmware Version: 1.2.9

When the Deco is in AP mode it seems that the SmartDHCP toggle button is ignored by the 6Ghz band of the network.

Whenever I connect to the 6Ghz network, I get an IP address assigned outside the range of my router DHCP address range. This does not happen on the regular 2.4Ghz and 5Ghz. networks.

 

My router assigns via DHCP in the range 192.168.0.100 to 192.168.150

When i connect to Deco 2,4Ghz. & 5Ghz. network i get an IP adress within this range

When i connect to Deco 6Ghz network i get an IP adress outside this range (192.168.0.244)

  0      
  0      
#1
Options
4 Reply
Re:Deco xe75pro smartDHCP doesn't disable on 6Ghz band
2024-03-11 07:00:02

  @Sweetdude 

Hi, Thank you very much for the feedback.

May I know the model number of the ISP router?

Have you also checked the router/default gateway on the 6GHz clients to see which device assigned this IP address?

Wait for your reply and best regards.

  0  
  0  
#2
Options
Re:Deco xe75pro smartDHCP doesn't disable on 6Ghz band
2024-03-12 08:50:23

  @David-TP Hi thanks for your reply.

My ISP modem is a sagecom F3896LG-ZG

The modem is configured in so called "bridge mode" and i use my own router for DHCP/DNS etc. That one is a Linksys WRT32x with OpenWRT version 23.05.2.

  0  
  0  
#3
Options
Re:Deco xe75pro smartDHCP doesn't disable on 6Ghz band
2024-03-22 14:19:46

  @David-TP Any status update on this?

  0  
  0  
#4
Options
Re:Deco xe75pro smartDHCP doesn't disable on 6Ghz band
2024-04-16 10:28:31

  @David-TP 

Dear David, it's been almost 4 weeks now. Can you give me a status update please?

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 198

Replies: 4

Related Articles