MJPG and JPG stream path
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
Anyone knows how to get those streams ?
Needed to integrate into my Fibaro Home Center 3 (domotic).
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
Since the Tapo C310 supports RTSP/ONVIF protocol, if your Fibaro Home Center 3 also supports RTSP/ONVIF protocol, you can establish the RTSP/ONVIF stream to watch the camera. You can refer to the instructions below for a try.
How to view Tapo camera on PC/NAS/NVR through RTSP/Onvif Protocol?
Best Regards
- Copy Link
- Report Inappropriate Content
Hi,
Since the Tapo C310 supports RTSP/ONVIF protocol, if your Fibaro Home Center 3 also supports RTSP/ONVIF protocol, you can establish the RTSP/ONVIF stream to watch the camera. You can refer to the instructions below for a try.
How to view Tapo camera on PC/NAS/NVR through RTSP/Onvif Protocol?
Best Regards
- Copy Link
- Report Inappropriate Content
@Solla-topee Hi, thanks a lot for your feedback.
Actually, I'm not 100% sure the HC3 support RTSP/ONVIF steam.
Was not the case a few months ago, I've ask them confirmation to be sure.
I haven't bought yet the camera... want to be sure that it works before...
- Copy Link
- Report Inappropriate Content
Hi,
Thank you for your support of our product.
Please note that we have no instructions/URL to capture the camera's image(such as a .jpg picture) on the third-party app/program, the above instruction is to stream the camera's live feed via RTSP/ONVIF connection on the third-party app/program.
Best Regards
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 592
Replies: 3
Voters 0
No one has voted for it yet.