Archer Vx1800v not configured properly with EasyMesh

Marvin_S

2024-07-01 11:18:05

Posts: 1730

Helpful: 126

Solutions: 196

Stories: 0

Registered: 2022-05-09

Re:Archer Vx1800v not configured properly with EasyMesh

2024-07-01 11:18:05

@Reda_Otrosh

Hi, thanks for posting question here.

What is the hardware version of your RE305? Does it suupport Easymesh? Here is the Easymesh compatible list for your reference.

Also, it is suggested to follow the guide to check your settings. And did you enable Smart Connect on the main modem router?

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.

0

#2

Reda_Otrosh

LV2

2024-07-01 12:36:54

Posts: 21

Helpful: 3

Solutions: 1

Stories: 0

Registered: 2020-06-05

Re:Archer Vx1800v not configured properly with EasyMesh

2024-07-01 12:36:54

@Marvin_S

The hardware version is V4 and it is supported EasyMesh as mention on website and my firmware is latest.

I test with Band steering and without.

If I connect it as normal extender both band connected normally but when it is EasyMesh only 1 Band connected.

With band steering

This is the case with me.

I follow all the steps to connect it but same result.

My question does EasyMesh routers only use 1 band and keep the other as Standby? or something is incorrect?

0

#3

Marvin_S

2024-07-02 07:11:36

Posts: 1730

Helpful: 126

Solutions: 196

Stories: 0

Registered: 2022-05-09

Re:Archer Vx1800v not configured properly with EasyMesh

2024-07-02 07:11:36

@Reda_Otrosh

Hi, thanks for your update.

Your understanding is correct to some extend. We have confirmed when Archer Vx1800v and RE305 set up Easymesh network, only one band is connected between them. Usually it is more recommended to connect to 5GHz band for less interference.

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.

0

#4

Reda_Otrosh

LV2

2024-07-02 07:37:17

Posts: 21

Helpful: 3

Solutions: 1

Stories: 0

Registered: 2020-06-05

Re:Archer Vx1800v not configured properly with EasyMesh

2024-07-02 07:37:17

@Marvin_S

Thanks for your calcification so that per design or it could be new firmware for enhancements since we can't choose the band as the router/extender are choosing it by it self. So we can't force to use 5G or 2.4G.

0

#5

Marvin_S

2024-07-02 08:37:37

Posts: 1730

Helpful: 126

Solutions: 196

Stories: 0

Registered: 2022-05-09

Re:Archer Vx1800v not configured properly with EasyMesh

2024-07-02 08:37:37

@Reda_Otrosh

Sorry for the confusion. I did not explain that clearly. The default connection is 5GHz band and 2.4GHz is usually a back-up. So tha related design will not be changed via firmware update, I think.

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.

0

#6

Reda_Otrosh

LV2

2024-07-02 08:45:14

Posts: 21

Helpful: 3

Solutions: 1

Stories: 0

Registered: 2020-06-05

Re:Archer Vx1800v not configured properly with EasyMesh

2024-07-02 08:45:14

Thanks again. Is that related to extender RE305 so if I buy RE505X or RE605X Will be the same?

0

#7

Archer Vx1800v not configured properly with EasyMesh

Archer Vx1800v not configured properly with EasyMesh

Information

Voters 0

Tags