Home

Forums

Stories

Knowledge Base

Home Network Community > Deco > codes used and related firmware and missing option

< Deco

codes used and related firmware and missing option

pwheels

2024-08-12 14:56:13 - last edited 2024-08-19 08:48:28

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-08-12

codes used and related firmware and missing option

2024-08-12 14:56:13 - last edited 2024-08-19 08:48:28

Tags: #Network Connectivity #Firmware Update #Access Point Mode #VLAN/IPTV

Model: Deco X20

Hardware Version: V3

Firmware Version: 1.1.7

Got some questions being:

what's the difference between code (DFN) vs (EU) on hardware V3 ?

The X20 using the app says it's on the latest firmware (1.1.7 build 20240101 rel 64163) however the if one selects the V# EU version it seems to be 1.2.0 Build 20240606

could it also be used on the X20(DFN) model ?

The last question why doesn't the VLAN option show up in any of the menu options or even IPTV ? My goal would be to have the main wifi on vlan id 1 and the IoT on vlan id 10

any way to setup the deco in this way ??

Thanks

1 Accepted Solution

David-TP

2024-08-13 06:26:58 - last edited 2024-08-19 08:48:28

Posts: 12361

Helpful: 1711

Solutions: 1120

Stories: 9

Registered: 2020-04-14

Re:codes used and related firmware and missing option-Solution

2024-08-13 06:26:58 - last edited 2024-08-19 08:48:28

@pwheels

Hi, welcome to the community.

The DFN version is a customized version for the local internet service provider.

I see a 1.2.0 version for Deco X20(DFN)_V3 is in the release process. It is suggested to wait for the release of the customized 1.2.0 version for Deco X20(DFN).

Deco X20(DFN)_V3_1.1.7 also supports IPTV/VLAN. But the VLAN settings are mainaly for internet and IPTV service. Deco doesn't support seperately configuring VLAN tags for Main WiFi and IOT Networks.

Thank you very much and best regards.

Check What's Currently Going on With Deco Deco Early Access Firmware Open for Test! Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.

Recommended Solution

2 Reply

David-TP

2024-08-13 06:26:58 - last edited 2024-08-19 08:48:28

Posts: 12361

Helpful: 1711

Solutions: 1120

Stories: 9

Registered: 2020-04-14

Re:codes used and related firmware and missing option-Solution

2024-08-13 06:26:58 - last edited 2024-08-19 08:48:28

@pwheels

Hi, welcome to the community.

The DFN version is a customized version for the local internet service provider.

I see a 1.2.0 version for Deco X20(DFN)_V3 is in the release process. It is suggested to wait for the release of the customized 1.2.0 version for Deco X20(DFN).

Deco X20(DFN)_V3_1.1.7 also supports IPTV/VLAN. But the VLAN settings are mainaly for internet and IPTV service. Deco doesn't support seperately configuring VLAN tags for Main WiFi and IOT Networks.

Thank you very much and best regards.

codes used and related firmware and missing option

codes used and related firmware and missing option

Information

Voters 0

Tags