Need to downgrade X50 Deco Firmware
Need to downgrade X50 Deco Firmware
Today my Deco X50 v1 upgraded automatically to firmware 1.5.5 and everything stopped working.
Ping goes smooth to any host but no connections are stablished. Can't open any page.
Rebooting the deco temporaly makes it work for around 50 seconds, then it stops working again.
Connecting directly to the provider's reouter works fine (the issue is on Deco X50).
Setting the deco to AP instead of Router makes it work "fine", but it's not what I need.
TP Link: Please test your firmwares before releaseing. You always break things at least once a year!
Also, I can't load firmware 1.3.1 or 1.4.1 because your web-interface says "Upgrade failed. Please select the latest version of firmware to upgrade."
You should allow users to downgrade freely! The router is mine, not yours. And if I want to downgrade, it's by busines. You should allow it, period!
Please fix this and try not to start asking useless questions as "have you tried 2.4 instead of 5.8? have you tried rebooting?"
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, it is more like to be always consistent with the internet service provider. If the ISP has updated its network and switched to another IP range, your previously configured static IP will no longer be valid. And if the public/IPV4 IP on the Home router is static, It is easier for others to track your network activities.
For the always-changing IP addresses on iPhones, there might be another possible reason. Apple devices use "Private Address" by default and it will randomly change its MAC address-https://support.apple.com/en-us/102509.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
Thanks for your answer and explanations. I'll consider to switch to a dynamic IP system and change my NAS IP although it will be trouble some with so many devices connected via SMB.
For the iPhone private address, yes my iPhone14pro using such setting and it maybe the cause as well. Now tracking Deco X50 with fw 1.5.5 and if any issue arises, I'll come back to you.
- Copy Link
- Report Inappropriate Content
Hello, I have the same problem with the last update, on version 1.4.1 everithing worked fine, now on firmware 1.5.5, hardware version V1 is a constant problem.
- Copy Link
- Report Inappropriate Content
Hi you try to ether install beta or downgrade to previous stable firmware.
See thread: https://community.tp-link.com/en/home/forum/topic/703810.
- Copy Link
- Report Inappropriate Content
Hello,
I want to ask if is normal that after upgrade I getting constant red light fod few seconds during boot of deco X50? If I need to downgrade fw.
I have two packs of X50s. One with FW 1.2.2 and one had 1.3 and accidentaly upgraded to 1.5.5.
When I reboot 1.5.5s light seqence on main unit goes yellow-red(2s)-green. Sometimes yellow-blue(0.5s)-red(1.5s)-green. It is normal? Because 1.2.2s main unit boot is just yellow-green.
(I am just worry because I had M5 and they died for constant red light.)
Colors are same for Router and AP modes. For both habe Dynamic IP from main routerboard.
So I want to rather know if downgrade to 1.2.2 will vanish that red light. Thank you.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 6
Views: 1213
Replies: 15
Voters 1
