How to Enable 2.4 and 5Ghz Channle in router

How to Enable 2.4 and 5Ghz Channle in router

How to Enable 2.4 and 5Ghz Channle in router
How to Enable 2.4 and 5Ghz Channle in router
2024-09-30 11:15:20 - last edited 2024-10-08 03:10:00
Model: Archer AX12  
Hardware Version: V1
Firmware Version: 1.1.22 Build 20240311 Rel. 73956(5553)

hi,

I have recently purchased the Archer AX12 router which is a wifi 6 router with dual band support. Now in creation of SSID I an see only one option but it does not specifically tell if this single SSID should use both 2.4 and 5 GHZ. So, my query is, is there any option to select to make this SSID to use both bands? I searched the router managment page but could not see that option. Only Below option there. When devices are connected it is only connecting to 2.4 channel. So, wanted to check if this setup is fine or anything needs to be changed from router side?

 

Kindly help!


 

I can see sperate SSID creation option under guest wifi which I do not need.

 

 

Thanks!

  0      
  0      
#1
Options
1 Accepted Solution
Re:How to Enable 2.4 and 5Ghz Channle in router-Solution
2024-09-30 13:01:02 - last edited 2024-10-08 03:10:00

  @arijitnaha 

 

Hi,

 

If you want different SSIDs for the 2.4 GHz band and the 5 GHz band, then you need to disable "Smart Connect". (click the ? icon next to Smart Connect for more information)

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:How to Enable 2.4 and 5Ghz Channle in router-Solution
2024-09-30 13:01:02 - last edited 2024-10-08 03:10:00

  @arijitnaha 

 

Hi,

 

If you want different SSIDs for the 2.4 GHz band and the 5 GHz band, then you need to disable "Smart Connect". (click the ? icon next to Smart Connect for more information)

Recommended Solution
  0  
  0  
#2
Options