New Release How to add an EasyMesh device to Deco network
New Release How to add an EasyMesh device to Deco network
This Article Applied to:
Wi-Fi Routers that support EasyMesh
Range Extenders that support EasyMesh
Decos that support EasyMesh
Recently, certain Deco models, such as Deco X50/X55 V1.2 have begun rolling out new software updates to support EasyMesh. This feature allows you to connect Deco devices with other EasyMesh-compatible routers or extenders from the same or different brands, creating a united mesh network that extends Wi-Fi coverage.
EasyMesh Configuration Guide
Before you start:
1. Please ensure the routers or extenders you plan to add support EasyMesh. Firmware upgrades may be required for certain models. Please check the user manual or ask the manufacturer before configuration.
TP-Link EasyMesh Device List
2. Check for firmware updates and release notes to confirm which Deco models support EasyMesh. You may find similar notes like the below:
Two typical network layouts when connecting EasyMesh routers or extenders with a Deco network:
Method 1: Adding EasyMesh routers or extenders to an existing Deco network.
Method 2: Adding Deco to an existing EasyMesh network.
Note:
1. Some advanced functions might not be available when Deco works as an EasyMesh extender, such as network dial-up, HomeShield/Parental Controls/QoS, etc.
2. When "Add a Deco to the existing EasyMesh Network", Deco's original network will be reset and all data will be cleared. It will copy the network settings from the EasyMesh network and will adopt its network name and password. You may need to manually connect your phone/tablet to the new EasyMesh Wi-Fi.
Adding an EasyMesh device to Deco network Configuration Details
Please feel free to leave your comments below with any questions about the new EasyMesh network. We’re open to discussions!
Related Articles:
Deco X50/X55_V1.2-1.4.5 Supports EasyMesh, Wireguard VPN and Fixed WAN Port
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, thanks for the update.
I'm afraid the PGW2440 KIT will not be part of the Deco Mesh. The devices connected to the WiFi of the powerline adapters are in the same IP segment and get IP addresses from Deco X50-5G as Deco connected clients. But there might still be a noticeable delay when moving from powerline adapters to Deco.
Best regards.
- Copy Link
- Report Inappropriate Content
Hi @Kevin_Z,
Ok, I was expecting that. But if instead a Deco X50-5G I use a Deco X50 or X55, I will be able to able to add an EasyMesh powerline to my Deco network following the tutorial below, right?
https://www.tp-link.com/en/support/faq/4248/
Thank you!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 6395
Replies: 12
Voters 0
No one has voted for it yet.