Tapo C200 needs reset and reconfiguration after every power outage
The camera is placed in a room where the electricity is turned off every day for 30 minutes. After the Tapo C200 is power cycled, it needs to be reseted every time and everything has to be reconfigured from the beginning. LED status = solid red.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
Typically, there is no need to reset and reconfigure the camera after a power failure. In your case, please check:
1. Is the router turned off and on as the Tapo C200? If so, please double-check if the router is working fine after power failure.
2. If so, disable the Smart Connect function on the router, and set different Wi-Fi names for 2.4GHz and 5GHz Bands on the router.
3. After confirming the router is working, turn off the Tapo C200 and turn it back on, then check if the camera will work.
Best Regards
- Copy Link
- Report Inappropriate Content
Hi,
Typically, there is no need to reset and reconfigure the camera after a power failure. In your case, please check:
1. Is the router turned off and on as the Tapo C200? If so, please double-check if the router is working fine after power failure.
2. If so, disable the Smart Connect function on the router, and set different Wi-Fi names for 2.4GHz and 5GHz Bands on the router.
3. After confirming the router is working, turn off the Tapo C200 and turn it back on, then check if the camera will work.
Best Regards
- Copy Link
- Report Inappropriate Content
@Solla-topee Thank you very much! Disabling "smart connect" solves my problem.
- Copy Link
- Report Inappropriate Content
@frizzo Glad to hear your problem is solved. 
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 123
Replies: 3
Voters 0
No one has voted for it yet.