Home Network Community > Deco > DECO XE75 pro unusable 2.4 Ghz network
< Deco

DECO XE75 pro unusable 2.4 Ghz network

DECO XE75 pro unusable 2.4 Ghz network

DECO XE75 pro unusable 2.4 Ghz network
DECO XE75 pro unusable 2.4 Ghz network
Thursday
Tags: #Firmware Update #Network Connectivity
Model: Deco XE75 Pro  
Hardware Version: V3
Firmware Version: 1.2.11

I have a network composed by 3 deco xe75 pro and one deco x50. My 2.4 Ghz network is unusable (packet drops, high latency, continuous disconnection of IoT devices).

I've done a scan of wifi and found that deco often chooses a channel used by other networks, and channel width is always 40 Mhz. The only way I have to reduce interference is to reduce channel width to 20 Mhz, but I can't do dat with the app. Can you help me?

  1      
 
  1      
 
#1
Options
3 Reply
Re:DECO XE75 pro unusable 2.4 Ghz network
Friday

  @MDI79 

 

Hi, thanks for posting question here.

May I confirm some information to understand your situation better?

1. Do you usually only use 2.4GHz network with 5Ghz off for the main network?

2.Does the unstable connection on 2.4GHz influence all client devices connected to all Decos? Or only some devices connected to certain Deco?

To assist and figure it out efficiently, we recommend submitting a support ticket via email. Please include your Forum ID, community nickname, a detailed description of the issue, and the troubleshooting steps you’ve taken in the subject line or body of your email. Thank you.

 

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
  0  
  0  
#2
Options
Re:DECO XE75 pro unusable 2.4 Ghz network
Friday
I use both 2.4 and 5 GHz networks. Disconnections happen manly to IoT devices connected to main deck. (Daikin air conditioners, Bosh dishwasher). Also ikea zigbee network is badly influenced with frequent lamp and sensor disconnections.
  1  
  1  
#3
Options
Re:DECO XE75 pro unusable 2.4 Ghz network
39 minutes ago

  @Marvin_S any updates as to when there will be a firmware version that would support changing the channel width for the 2.4Ghz band? I have 6 Nest Outdoor cameras that would benefit being on the 2.4Ghz band, but it is severely unstable (constantly drop out or stay offline). I have them on the 5Ghz band and they behave normal with a brief disconnect every few days or so.

  0  
  0  
#4
Options

Information

Helpful: 1

Views: 79

Replies: 3

Tags

Firmware Update Network Connectivity
Related Articles
deco xe75 pro
1021 3
Deco XE75 Pro
905 2
Deco XE 75 Pro Ethernet Backhaul
4342 0
XE75 Pro Cannot update firmware
744 3
Deco XE75 Pro and WiFi calling
923 2
6ghz issue deco xe75 pro
246 4
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.