TP-Link Community > Tapo Smart Camera > Alarm setup different times for different days
< Tapo Smart Camera

Alarm setup different times for different days

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Alarm setup different times for different days

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Alarm setup different times for different days
Alarm setup different times for different days
2025-02-05 19:42:40 - last edited 2025-03-02 09:25:26
Tags: #Recording #Notification #Alarm
Model: Tapo C425  
Hardware Version: V1
Firmware Version: 1.2.23

wir möchten die Kameras als Sicherheitssystem im Büro benutzen und der Alarm soll zb unter der Woche zwischen 20 Uhr und 09 Uhr aktiv sein und am Wochenende rund um die Uhr. Ich finde aber bei den Einstellungen nur die Möglichkeit 20-09 Uhr täglich einzustellen - damit wäre aber der Alarm am Wochenende unter Tags inaktiv.

 

wie kann ich das lösen? 

 

Idealerweise sollten die Kameras auch zu Bürozeiten nicht aufzeichnen und keine Benachrichtigungen auslösen (sonst hab ich alle 10sec eine Meldung am Handy).

danke und lg

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Alarm setup different times for different days-Solution
2025-02-07 01:58:05 - last edited 2025-03-02 09:25:26

  @Awedis 

 

Custom schedule is supported in the Alarm schedule, you can choose a time interval as well as the specific days of the week on which you want the alarm to be effective.

 

Custom notification schedule is also supported, you can set it in camera Device Settings page > Notifications > Schedule, choose Custom Time.

 

As for the recording, if you use a microSD card for local recording, recording schedule is available. Go to camera Device Settings page > Storage & Recording > Enable microSD card recording, then click Recording Schedule to set it up. 

Cloud video does not support recording schedule, the video will be recorded once camera detects movement.

▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:Alarm setup different times for different days-Solution
2025-02-07 01:58:05 - last edited 2025-03-02 09:25:26

  @Awedis 

 

Custom schedule is supported in the Alarm schedule, you can choose a time interval as well as the specific days of the week on which you want the alarm to be effective.

 

Custom notification schedule is also supported, you can set it in camera Device Settings page > Notifications > Schedule, choose Custom Time.

 

As for the recording, if you use a microSD card for local recording, recording schedule is available. Go to camera Device Settings page > Storage & Recording > Enable microSD card recording, then click Recording Schedule to set it up. 

Cloud video does not support recording schedule, the video will be recorded once camera detects movement.

▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
Recommended Solution
  0  
  0  
#2
Options
Re:Alarm setup different times for different days
2025-02-07 08:17:07

  @Wayne-TP thanx. Unfortunately the Alarm schedule doesn't help here as I can choose the days but I can not choose different times for different days. e.g.: I would like mon-fri 19:00 - 08:00 (next day) but also from Friday 19:00 till Monday 08:00 (all day Sat and Sun).

 

and that setup option I can't find anywhere

 

regards

Awedis 

 

  0  
  0  
#3
Options
Re:Alarm setup different times for different days
2025-02-10 01:41:57

Awedis wrote

  @Wayne-TP thanx. Unfortunately the Alarm schedule doesn't help here as I can choose the days but I can not choose different times for different days. e.g.: I would like mon-fri 19:00 - 08:00 (next day) but also from Friday 19:00 till Monday 08:00 (all day Sat and Sun).

 

and that setup option I can't find anywhere

 

regards

Awedis 

 

  @Awedis 

 

This is not supported so far. 

▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 578

Replies: 3

Tags

Recording Notification Alarm
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.