Solution Wireless Devices Fail to Connect to the 2.4G Network on Archer NX200 Once It's Rebooted
Wireless Devices Fail to Connect to the 2.4G Network on Archer NX200 Once It's Rebooted
Tags:
#Official
This Article Applied to
Archer NX200(EU) V1
Phenomenon Description:
If 5GHz band is disabled and only 2.4GHz network is on, after rebooting Archer NX200, the result is all wireless client devices fail to connect to Archer NX200.
If you are not sure whether your problem is consistent with this thread, please refer to detailed discussion in another thread to know more.
Solution:
Please try this beta firmware as a workaround. And final fix will be finished in the next official firmware release.
Note: Please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding.
Thank you and best regards!
Check Out the Latest Posts:
Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router
EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller.
Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability.
TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
1 Accepted Solution
