Business Community > Gateways > Asking for Configuration for 2 LANs with 2 WAN in Dynamic ISP.
< Gateways

Asking for Configuration for 2 LANs with 2 WAN in Dynamic ISP.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Asking for Configuration for 2 LANs with 2 WAN in Dynamic ISP.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Asking for Configuration for 2 LANs with 2 WAN in Dynamic ISP.
Asking for Configuration for 2 LANs with 2 WAN in Dynamic ISP.
2025-04-18 10:01:57 - last edited 2025-04-21 01:58:03
Tags: #VLAN & Multi-Networks #WAN Setup #NAT #ACL
Model: ER7206 (TL-ER7206)  
Hardware Version: V2
Firmware Version: 2.1.2 Build 20240324 Rel.46738

My network planHardware Version 2.2 in Global but not seen in our region Philippines. It only shows 2.0 for now.

"May I ask how to configure LAN 1 (private) on ports 3 and 4, and LAN 2 (public IoT) on ports 5 and 6? I have images of my network plan. I have one ISP in dynamic mode on WAN2 and a backup ISP2 on the WAN1 SFP port. I hope someone from TP-Link or their staff can assist me in configuring it in standalone mode. Thanks!"

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Asking for Configuration for 2 LANs with 2 WAN in Dynamic ISP.-Solution
2025-04-21 01:57:59 - last edited 2025-04-21 01:58:03

Hi @Elixer 

Thanks for posting in our business forum.

Hardware version does not matter. If you care to learn about it:  Common Questions About the Hardware Version and Firmware Update

Configure the VLAN and set different VLAN ID on 3, 4 and 5, 6.

 

We do not help with the step-by-step and it is impossible to reply back and forth to finish the VLAN setup, which is complicated as well. If you need a walkthrough on VLAN config, contact the support team via phone.

See the existing guide about  the VLAN config:

How to Set Up VLAN Interface on the Omada Router

Recommended Solution
  1  
  1  
#2
Options
1 Reply
Re:Asking for Configuration for 2 LANs with 2 WAN in Dynamic ISP.-Solution
2025-04-21 01:57:59 - last edited 2025-04-21 01:58:03

Hi @Elixer 

Thanks for posting in our business forum.

Hardware version does not matter. If you care to learn about it:  Common Questions About the Hardware Version and Firmware Update

Configure the VLAN and set different VLAN ID on 3, 4 and 5, 6.

 

We do not help with the step-by-step and it is impossible to reply back and forth to finish the VLAN setup, which is complicated as well. If you need a walkthrough on VLAN config, contact the support team via phone.

See the existing guide about  the VLAN config:

How to Set Up VLAN Interface on the Omada Router

Recommended Solution
  1  
  1  
#2
Options

Information

Helpful: 0

Views: 300

Replies: 1

Tags

VLAN & Multi-Networks WAN Setup NAT ACL
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.