TP-Link Community > Tapo Smart Camera > picking up strongest SSID
< Tapo Smart Camera

picking up strongest SSID

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

picking up strongest SSID

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
picking up strongest SSID
picking up strongest SSID
2025-05-02 17:42:53 - last edited 2025-06-10 06:23:50
Model: Tapo C510W   Tapo C520WS  
Hardware Version: V1
Firmware Version: V1.2.11

My Router, Extender A, Extender B, Extender pod C has same SSID, it seems my cameras doesn't pick up the strongest signal and hence went offline.

 

Does tapo do wifi autoroaming to pick best signal based on same SSID?

And i know it is impossible to reset and reconfigure without physically resetting on the camera itself, right?

Thanks

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:picking up strongest SSID-Solution
2025-05-08 03:00:21 - last edited 2025-06-10 06:23:50

  @Wavyk 

Hi,
The Tapo camera currently does not support the auto-roaming feature to pick up the best signal based on the same SSID. If the camera is near the router or an extender, please try to turn off the camera, turn it back on, and then check if it will connect to the Wi-Fi with the best signal strength.

 

If you want the camera to connect to a Wi-Fi with a different Wi-Fi name or password, it's required to reset and reconfigure the camera.

 

Best Regards

>> Smart Home: Introduction to Common Smart Action Scenarios for Tapo Cameras >> Tapo Camera Day/Night Mode Selection Guide: Best Settings Recommendations for Different Scenarios >> What should I do if my Tapo camera triggers false detection? >> Enhance Your Tapo App Experience: Introduction to Several Practical Features
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:picking up strongest SSID-Solution
2025-05-08 03:00:21 - last edited 2025-06-10 06:23:50

  @Wavyk 

Hi,
The Tapo camera currently does not support the auto-roaming feature to pick up the best signal based on the same SSID. If the camera is near the router or an extender, please try to turn off the camera, turn it back on, and then check if it will connect to the Wi-Fi with the best signal strength.

 

If you want the camera to connect to a Wi-Fi with a different Wi-Fi name or password, it's required to reset and reconfigure the camera.

 

Best Regards

>> Smart Home: Introduction to Common Smart Action Scenarios for Tapo Cameras >> Tapo Camera Day/Night Mode Selection Guide: Best Settings Recommendations for Different Scenarios >> What should I do if my Tapo camera triggers false detection? >> Enhance Your Tapo App Experience: Introduction to Several Practical Features
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 232

Replies: 1

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.