TP-Link Community > Tapo Smart Camera > Saving recordings to Tapo Hub
< Tapo Smart Camera

Saving recordings to Tapo Hub

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Saving recordings to Tapo Hub

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Saving recordings to Tapo Hub
Saving recordings to Tapo Hub
2025-05-30 14:57:21 - last edited 2025-06-11 08:59:40
Tags: #Firmware #Recording #hub
Model: Tapo C200  
Hardware Version: V5
Firmware Version: 1.2.2

Hello,

I received on 1 of my 3 C200 cameras the latest firmware 1.2.2 for version V5.
As I read on release notes:

"Added support for saving recordings to Tapo Hub on the same local network through Device Settings -> Storage & Recording -> Local storage -> Storage Location."

What Tapo Hub model is now supported? I tried to find my Tapo H200 with SD card but seems not supported.

 

 

Thanks

 

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Saving recordings to Tapo Hub-Solution
2025-06-03 02:40:11 - last edited 2025-06-11 08:59:40

  @PeterGZ 

 

What's the firmware version of your Tapo H200 hub? Make sure it is updated as well.

 

To use this feature, the camera and the hub should be on the same network (subnet). Pay attention to the network settings like network/AP isolation, for example, if the hub is wired to the router while the camera is on an isolated (guest) WiFi, they won't find each other.

 

If you're using an iPhone, make sure the Local Network permission is enabled for the Tapo app. Try using another phone or tablet to see if that helps.

 

▷ How to connect Tapo Wi-Fi Cameras/doorbells with Tapo Hub

▶ CES 2026 Meet TP-Link AI Assistant and More New Products!
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Saving recordings to Tapo Hub-Solution
2025-06-03 02:40:11 - last edited 2025-06-11 08:59:40

  @PeterGZ 

 

What's the firmware version of your Tapo H200 hub? Make sure it is updated as well.

 

To use this feature, the camera and the hub should be on the same network (subnet). Pay attention to the network settings like network/AP isolation, for example, if the hub is wired to the router while the camera is on an isolated (guest) WiFi, they won't find each other.

 

If you're using an iPhone, make sure the Local Network permission is enabled for the Tapo app. Try using another phone or tablet to see if that helps.

 

▷ How to connect Tapo Wi-Fi Cameras/doorbells with Tapo Hub

▶ CES 2026 Meet TP-Link AI Assistant and More New Products!
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 795

Replies: 1

Tags

Firmware Recording
hub
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.