Hello  @Mr_Arif ,

Regarding firmware updates, we have not yet received any definitive information. Thank you for your feedback.

The Archer C6_V4 supports two operation modes: Router Mode and Access Point Mode.

When you mention WDS, are you referring to using the C6 as a satellite router?

If so, some advanced features are currently unavailable for synchronization with satellite routers. We will gradually implement this functionality in future firmware updates.

  @Joseph-TP 

Sir, all your comments/Replies are pointless. 

• And as you said that you did not get any information regarding the firmware, so I have pinned a picture with this post, please take a look at it. 

First of all, I am using my router as a secondary router. And I did not say anything about the lack of features in WDS mode, I said that the network and internet speed is not stable in WDS mode and sometimes it shows no internet even though there is internet. 

So please Sir, if you have to make an excuse then at least make a good one and please don't give this baseless Replies 

Hello @Mr_Arif ,

Thanks for getting to me.

As you mentioned, if you are using Archer C6_V4 the IN region, it is highly likely that you are using Archer C6(US)_V4 rather than the EU version.
Version 1.14.30 is applicable to the EU version. As for the US version, we have not received any relevant firmware update notifications yet.

Regarding the 'WDS mode' that we might have misunderstood before. Maybe you could tell me about your network topology, for example:
Main router—second router in WDS mode )))((( client devices

(Note: — stands for wired connection, )))((( stands for wireless connection )

What I confirmed with you before was the operation mode of the second router, which is either Access Point mode or Wireless router mode. Because C6_V4 currently only supports these two modes.
If you expand the second router wirelessly, have you created an easymesh network between the main router and the satellite router?