Solution EasyMesh Network Becomes Unstable on Archer AX58 After Updating Firmware to 1.5.2
This Article Applied to:
Archer AX58(EU)_V1_1.5.2 Build 20250812
Phenomenon:
Some Archer AX58 users have recently reported that updating their Archer AX58(EU)_V1 to 1.5.2 causes their EasyMesh network to become unstable after 8-10 hours of operation. This requires powering off the Archer AX58 and restarting the router to restore the connection.
It was initially reported by DenisG in this thread.
Available Solution:
We want you to know that we understand the inconvenience this change may cause. However, our development team quickly identified the cause and provided a beta firmware. This beta firmware has been verified to address this exception. We recommend downloading and testing it:
| Model | Direct Download Link |
| Archer AX58(EU)_V1 | Archer AX58(EU)_V1_1.5.2 Build20250922(Beta Firmware) |
Note:
- Please be sure you have read the Beta Test Agreement before upgrading the pre-release firmware!
- For the sake of insurance, it's always recommended to save a copy of the router's Backup Config file before upgrading or downgrading.
- You may follow the guide to upgrade the firmware of your router. How to Upgrade the Firmware on the TP-Link Wi-Fi Routers.
Please don't hesitate to reply with your experience with the Archer AX58 beta firmware.
If you have any additional feedback on the Archer AX58, please leave a reply here. This includes, but is not limited to:
- Complete network topology (with the extender model)
- Specific operational status, etc.
Thank you for your patience and cooperation.