Early Access New Firmware for Archer BE260/Archer BE400 to Support VPN Merge, New ECO Mode, and More
This article applies to:
Archer BE400(US/EU/CA/SG/KR/AU/JP)_V1.0/V1.6
Archer BE400(EU)_V1.20
Archer BE6100(USW)_V1.6
Archer BE6500(US/JP/CA)_V1.0
Archer BE260(US/JP) _V1.0/V1.6
Archer BE5000(US/JP)_V1.0/V1.6
Hello everyone!
We are excited to announce the latest firmware update for Archer BE260, Archer BE400, etc., which introduces a range of new features and enhancements. We look forward to your experience!
We encourage all users to upgrade to the latest firmware and share your feedback with us. Your valuable opinions are crucial to our continued product improvement!
Now, download it and enjoy the new features for your router!
New Features/Enhancements:
1. VPN Merge
We have officially upgraded the previous VPN Client feature to the new, more powerful VPN Merge. This optimization significantly enhances the flexibility of your network. With VPN Merge, you can now connect different devices on your network to multiple VPN servers simultaneously. For example, your work laptop can connect to a corporate VPN while your smart TV uses another VPN for video streaming. To use this feature, simply enable VPN Merge, add your desired servers to the Server List, and assign them to specific devices in the Client List.
2. ECO Mode V2
We've upgraded the new ECO Mode 2.0 feature, designed to help you save power intelligently. You can select the default Smart ECO mode, which automatically adjusts power consumption based on your real-time traffic usage and turns off the LEDs. This minimizes the impact on your regular internet activities while reducing energy use. For more personalized control, you can also choose from several other power-saving modes and even schedule them to be active only during a specific time period.
3. Admin Password Recovery
We have introduced new methods to recover your local administrator password, ensuring you never lose access to your router's settings. You can now choose between two secure recovery options. You can enable and configure these options under System > Administration.
Security Questions
Set up answers to predefined security questions. This allows you to verify your identity and reset your password quickly.
Email Recovery
Configure a designated email address and your own SMTP server to receive password recovery instructions directly to your inbox.
4. Advanced USB Feature
We have upgraded the USB Sharing feature with two powerful new management tools. First, you can now perform a Disk Scan to verify the health of your connected drive. This can be triggered manually or scheduled to run automatically at regular intervals for proactive data protection. Second, we have integrated a Format function, allowing you to format a USB drive directly from the router's interface without the need for a computer. These features provide greater convenience and control over your network storage.
5. Backup & Restore
We have significantly upgraded the router's backup functionality for greater control and security. You can now perform a Selective Backup, allowing you to choose specific configuration modules to save, such as Network, Wireless, or Security settings. Additionally, you can now encrypt the backup file with a password, ensuring your sensitive configuration data is protected from unauthorized access.
6. DHCP Detection
To help you troubleshoot common network issues, we have added a DHCP Server Detection tool. Having more than one DHCP server active on a network can cause IP address conflicts and prevent devices from accessing the internet. This new one-click tool allows you to scan your local network to easily identify any other active DHCP servers, helping you resolve conflicts to ensure a stable and reliable connection.
7. Tether App client list optimization
We have optimized the performance of the Tether app when accessing the client list, reducing the latency when retrieving the list. The app now also displays the signal strength of wireless clients, allowing you to easily understand the network status of your connected devices.
8. Guest Network Exception Button
Add a button to the Access Control whitelist that does not apply to the Guest Network. When enabled, the allow list mode will not affect the Guest Network. All devices in the Guest Network can connect to the internet.
Other Enhancements:
- Supports synchronization of DDNS during OPENVPN server configuration setup.
- Enhanced the safety of the device.
- Enhanced the wireless stability of the device.
Bug Fixes:
1. Fixed the issue that the connection to the Wireguard VPN Server failed under specific circumstances.
2. Fixed the issue that the “Hide SSID” setting in Tether APP configuration was not taking effect.
Firmware Download:
Before the Upgrade
(1) IMPORTANT! Once upgraded to 1.1.1 for Archer BE400/BE6100/BE6500, you CANNOT downgrade back to the 1.0.x version.
(2) Please be sure you have read the Beta Test Agreement before upgrading the Pre-Release firmware!
(3) For the sake of insurance, it's always recommended to save a copy of the router's Backup Config file before upgrading or downgrading.
(4) You may follow the guide to upgrade the firmware of your router. How to Upgrade the Firmware on TP-Link Wi-Fi Routers?
Direct Download Links
| Model | Download Link |
| Archer BE400_V1.0/V1.6 | Archer BE400_V1.0/V1.6_1.1.1 Build 20251225(Pre-release Firmware) |
| Archer BE400(EU)_V1.20 | Archer BE400(EU)_V1.20_1.1.1 Build 20251225(Pre-release Firmware) |
| Archer BE6100(USW)_V1.6 | Archer BE6100(USW)_V1.6_1.1.1 Build 20251225 (Pre-release Firmware) |
| Archer BE6500(US/JP/CA)_V1.0 | Archer BE6500(US/JP/CA)_V1.0_1.1.1 Build 20251225(Pre-release Firmware) |
| Archer BE260(US/JP) _V1.0/V1.6 | Archer BE260(US/JP) _V1.0/V1.6_1.0.5 Build20251224(Pre-release Firmware) |
| Archer BE5000(US/JP)_V1.0/V1.6 | Archer BE5000(US/JP)_V1.0/V1.6_1.0.5 Build20251224(Pre-release Firmware) |
Additional Information
If you encounter any issues during or after your router firmware upgrade, please leave a message below with the following information. Your feedback helps us continuously improve and provide you with better products and support. Please provide:
1. A detailed network layout diagram, including device connection methods, especially if you are using EasyMesh satellite devices.
2. A detailed description of the problem, providing more information about the specific circumstances that triggered it.
We always value your feedback highly. Thank you for your continued support and for being a member of our community.
Related Article:
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I am facing some network issue with this build recently like high Ping between my PC to the ADSL router. As you know, I am connecting my BE400 directly(Through WAN port) to Vx1800v. So when I am trying to ping my Vx1800v or access its Web, the loading is very slow.
If I try to Ping from BE400 to Vx1800v, I got request time out.
Also, ping from BE400 to 8.8.8.8 get destination not reachable
While ping from PC is ok.
But the internet is slow.
After restarting the router BE400. Everything is ok for a while now then come back after 4 or 5 minute.
Note: Daily restart for my BE400 and Vx1800v at 6 AM is scheduled.
- Copy Link
- Report Inappropriate Content
Hi @Reda_Otrosh ,
Is this a new problem that has only recently emerged? Have you enable QoS feature on the BE400? If yes, disable the QoS for a try.
What if you temporarily remove the BE400? Please check whether there are any remaining anomalies with high latency or slow loading.
- Copy Link
- Report Inappropriate Content
Yes QoS was enabled, so I have disabled it and keep monitoring for this point.
Yes it is new issue, but I am still investigating it,to confirm if it is related to ADSL modem or the BE400. Or it could be my Archer AX23 as it was the satellite device that was connected to it also. So if it will occur today, I will start to eliminate the devices.
- Copy Link
- Report Inappropriate Content
Yesterday, I got firmware update for my BE400 with the following version
S-Ver = 1.2.3 Build 20260107 rel.48335
This version includes all the features for this thread, it looks fine and I noticed the following after the update.
1. Tether App UI improved.
2. Connection is more stable.
3. These logs are not exists anymore
2026-02-10 05:54:01 monit[15899]: <5> 302201 monit restart ledctrl
2026-02-10 05:53:01 monit[10722]: <5> 302201 monit restart ledctrl
2026-02-10 05:52:01 monit[5232]: <5> 302201 monit restart ledctrl
2026-02-10 05:51:01 monit[32210]: <5> 302201 monit restart ledctrl
4. Still monitoring the traffic usage in daily basis, if it is accurate or not.
I have just simple question for this normal log
2026-02-11 05:54:04 cloud-report[874]: <6> 231058 report dpi
2026-02-11 05:54:02 cloud-report[786]: <6> 231059 report period
2026-02-11 05:44:03 cloud-report[12868]: <6> 231058 report dpi
2026-02-11 05:44:01 cloud-report[12673]: <6> 231059 report period
2026-02-11 05:34:06 cloud-report[25223]: <6> 231058 report dpi
2026-02-11 05:34:02 cloud-report[25142]: <6> 231059 report period
It is triggered every 10 minutes.
Is it related to "Parental control/Kidshield ", "Authorize Third-Party Services", or this "Join User Experience Improvement Program". Is there a way to disable or reduce it with disabling Parental control?
- Copy Link
- Report Inappropriate Content
Hi @Reda_Otrosh ,
Thanks for sharing your usage experience with the new features. And we are glad to hear that the new features are effective and running stably.
For the log, if you enable Parental control, will it disappear? Will these logs significantly affect your internet usage?
I have sent the feedback to the relevant department and will reply here if I receive any updates.
- Copy Link
- Report Inappropriate Content
It is not affecting my usage at all, my question is for security reason to understand what is the kind of data uploaded? As I am subscribed with advance features. If it is safe and related to parental control. But if it is related to other thing at least to know what is it?
Thanks in advance.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2877
Replies: 36
Voters 0
No one has voted for it yet.