Home Network Community > 5G/4G Routers > NX200v1 disconnection error back with firmware 1.7.0
< 5G/4G Routers

NX200v1 disconnection error back with firmware 1.7.0

NX200v1 disconnection error back with firmware 1.7.0

NX200v1 disconnection error back with firmware 1.7.0
NX200v1 disconnection error back with firmware 1.7.0
a week ago - last edited a week ago
Tags: #Network Connectivity #Firmware Update #5G
Model: Archer NX200  
Hardware Version: V1
Firmware Version: 1.7.0

 

Updated firmware to 1.7.0 on KSA STC Network, network disconnection error back.

2026-01-23 21:51:25 [5] LTE: Connected to the network!

2026-01-23 22:00:51 [3] LTE: Exception:GetMobileStatus fail

2026-01-23 22:00:56 [3] LTE: Exception:GetMobileStatus fail

2026-01-23 22:01:01 [3] LTE: Exception:GetMobileStatus fail

2026-01-23 22:01:02 [5] LTE: New text message count is 0

2026-01-23 22:01:03 [5] LTE: SIM plugged.

2026-01-23 22:01:03 [5] LTE: Not registered, searching!

2026-01-23 22:01:06 [5] LTE: Registered with a network!

 

 

 

Custom beta firmware network was stable without any errors.

Beta Firmware Version: 1.6.0 3.0.0 v60a2.0 Build 250702 Rel.41162n_Beta

Seems beta fixes still not merged with official firmware stacks.

 

Old case ID : TKID241236673

 

 

Yasin

  2      
 
  2      
 
#1
Options
4 Reply
Re:NX200v1 disconnection error back with firmware 1.7.0
a week ago

  Hi @David-TP ,

 

Can support release earlier fix for firmware 1.7.0.  Network connection drops are high and I unable to revert to beta firmware.

  0  
  0  
#2
Options
Re:NX200v1 disconnection error back with firmware 1.7.0
a week ago

  @myag 

Hi, thanks a lot for your time and patience.

Can you also give an update to TKID241236673 to inform the senior engineer that a similar issue starts again on the official 1.7.0?

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Wi-Fi Heatmap ready for Test! ▶Deco X50/X55_V1.3_1.3.1 Introduced Channel Selection, WiFi Access Control and WireGuard VPN ▶Deco BE65_V2_1.3.0 Added DoH & DoT, Speed Limit and Internet Backup Try to leave a Message if urgent help is required.
  0  
  0  
#3
Options
Re:NX200v1 disconnection error back with firmware 1.7.0
14 hours ago

I almost upgraded the 1.6.0 3.0.0 v60a2.0 Build 250728 Rel.76285n_Beta version to 1.7.0 but I stopped and checked the forum first since I had the same issue before and had to go through support system for the working firmware. 


It is unbelievable that such a big company as TP-Link cannot track reported bugs and merge the fixed code properly before pushing the firmware update which can potentially break the main functionality of a device. And this is not the first time it happened... 

 

  5  
  5  
#4
Options
Re:NX200v1 disconnection error back with firmware 1.7.0
13 hours ago - last edited 7 hours ago

  @pirate7 

 

I got new beta firmware and the stability is back.  This new beta firmware holding on connection for 36hrs without any reconnects or errors.  None of the earlier firmware were holding on connections for 12hrs and had frequent 5G band Switchings.

  0  
  0  
#5
Options

Information

Helpful: 2

Views: 4555

Replies: 4

Tags

Network Connectivity Firmware Update 5G
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.