Home Network Community > Deco > Deco X60 V3 Connection Preference does not work on clients
< Deco

Deco X60 V3 Connection Preference does not work on clients

Deco X60 V3 Connection Preference does not work on clients

Deco X60 V3 Connection Preference does not work on clients
Deco X60 V3 Connection Preference does not work on clients
Yesterday
Tags: #Network Connectivity #Connection Preference #IoT Network
Model: Deco X60  
Hardware Version: V3
Firmware Version: 1.4.0

I currently have two Deco X60 v3.0 receivers with firmware 1.4.0 Build 20241212, but since version 1.3.0 Build 20240830, the preferred connection to a specific satellite seems to be ignored by clients, primarily Tapo devices, where I've noticed it doesn't respect the connection preference settings.

These devices are connected to the 2.4 GHz IoT network.

  1      
 
  1      
 
#1
Options
2 Reply
Re:Deco X60 V3 Connection Preference does not work on clients
17 hours ago

  @Alex-Rdz 

Hi, welcome to the community.

Can I have the model numbers of the Tapo devices?

Please also refer to this link to help me submit the Deco App log:

How to submit Deco APP log

 

It would be highly appreciated if you could add some screenshots of the network maps to the email content:

Thank you very much.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Wi-Fi Heatmap ready for Test! ▶Deco X50/X55_V1.3_1.3.1 Introduced Channel Selection, WiFi Access Control and WireGuard VPN ▶Deco BE65_V2_1.3.0 Added DoH & DoT, Speed Limit and Internet Backup Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Deco X60 V3 Connection Preference does not work on clients
5 hours ago - last edited 5 hours ago

Hi David,

I've already sent the log with attached images via email.

 

The versions with which I've seen this problem are:

Tapo C325WB v1.0 Firmware 1.4.2 Build 251114 (Primary Deco Preference)

Tapo C320WS v2.0 Firmware 1.3.5 Build 250522 (Secondary Deco Preference)

 

Additional information regarding signal strength: when connected to the primary Deco, the Tapo C320WS registers a value of -65 RSSI, while when connected to the secondary Deco, it registers a value of -50 RSSI.

  0  
  0  
#3
Options

Information

Helpful: 1

Views: 61

Replies: 2

Tags

Network Connectivity Connection Preference IoT Network
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.