TP-Link CommunityTapo Smart CameraCamera dont return to default or previous location after tracking ,viewpoint problem
Tapo Smart Camera

Camera dont return to default or previous location after tracking ,viewpoint problem

Camera dont return to default or previous location after tracking ,viewpoint problem

Camera dont return to default or previous location after tracking ,viewpoint problem
Camera dont return to default or previous location after tracking ,viewpoint problem
2026-03-04 14:48:10 - last edited 2026-04-01 07:44:02
Model: Tapo C660 KIT  
Hardware Version: V1
Firmware Version: 1.1.7

Camera dont return to default or previous location after tracking , after fellowing the track motion it goes to random location , it also affects the viewpoint i have set view point one and two both have been affected by the new location the camera rest.

0
0
#1
1 Accepted Solution
Re:Camera dont return to default or previous location after tracking ,viewpoint problem-Solution
2026-03-05 09:39:28 - last edited 2026-04-01 07:44:02

  @TFuser 

Hi, 
It's recommended to refer to the following instructions for further assistance.
What to do if the Tapo Pan/Tilt camera can't return to its original position properly after tracking
Best regards

>> Smart Home: Introduction to Common Smart Action Scenarios for Tapo Cameras >> Tapo Camera Day/Night Mode Selection Guide: Best Settings Recommendations for Different Scenarios >> Enhance Your Tapo App Experience: Introduction to Several Practical Features >> Troubleshooting for Tapo Camera's Privacy Mode Automatic Activation
Recommended Solution
0
0
#2
3 Reply
Re:Camera dont return to default or previous location after tracking ,viewpoint problem-Solution
2026-03-05 09:39:28 - last edited 2026-04-01 07:44:02

  @TFuser 

Hi, 
It's recommended to refer to the following instructions for further assistance.
What to do if the Tapo Pan/Tilt camera can't return to its original position properly after tracking
Best regards

>> Smart Home: Introduction to Common Smart Action Scenarios for Tapo Cameras >> Tapo Camera Day/Night Mode Selection Guide: Best Settings Recommendations for Different Scenarios >> Enhance Your Tapo App Experience: Introduction to Several Practical Features >> Troubleshooting for Tapo Camera's Privacy Mode Automatic Activation
Recommended Solution
0
0
#2
Re:Camera dont return to default or previous location after tracking ,viewpoint problem
2026-03-05 13:42:58

  @Solla-topee So basically we just wait for you to officially release the new version and just wait until it's ready?

0
0
#3
Re:Camera dont return to default or previous location after tracking ,viewpoint problem
2026-03-06 02:06:17

  @TFuser 

Hi, 
It's recommended to contact our technical support team to try the new firmware, which may help with the phenomenon you reported. If the problem persists, our technical support team will continue assisting you.
Best regards

>> Smart Home: Introduction to Common Smart Action Scenarios for Tapo Cameras >> Tapo Camera Day/Night Mode Selection Guide: Best Settings Recommendations for Different Scenarios >> Enhance Your Tapo App Experience: Introduction to Several Practical Features >> Troubleshooting for Tapo Camera's Privacy Mode Automatic Activation
0
0
#4

Information

Helpful: 0

Views: 254

Replies: 3

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.