TpLink bricked router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

TpLink bricked router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TpLink bricked router
TpLink bricked router
2019-09-14 19:14:55
Model: TL-WR840N  
Hardware Version: V2
Firmware Version: Bricked

I need help fixing my router which i bricked flashing wrong firmware

  0      
  0      
#1
Options
14 Reply
Re:TpLink bricked router
2019-09-15 06:20:12

@Tesla59 

  1. Download stock firmware from tplink website for your device and unpack it. For a example next link   https://www.tp-link.com/en/support/download/tl-wr840n/v2/#Firmware
  2. Perform command: dd if=orig.bin of=tplink.bin skip=257 bs=512 to create firmware for tftp
  3. Use tftp mode to flash tp_recovery.bin
  4. or watch this video to creat stripped firmware https://www.youtube.com/watch?v=HNg1CZGZ9N4&list=WL&index=34&t=6s
  0  
  0  
#3
Options
Re:TpLink bricked router
2019-09-16 06:09:30

@Tesla59 

 

Try to refer to the instruction mentioned on this article to do that. 

https://community.tp-link.com/en/home/stories/detail/582

 

Good day. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options
Re:TpLink bricked router
2020-05-13 18:57:00

@Tesla59 

 

 

Hello i also have similar model

 

TL-WR840N<W> BR v:4.0   ISP customized firmware support 

 

We bought them for our ISP and installed the customized bin, everytime we reset the router it reboots with our ISP configuration, but now we have a problem

 

we need to change the customized data so we have created a new firmware.bin customized with new WIFI etc.. credentials..

 

we tried loading into the routers using the .bat files on the manuals  it finishes the process after 5 minutes. but after reseting the routers they allways come with initial customized data from our ISP. and not with the new backup data we tried loading..

 

 

so i tried to flash the original firmware via tftpd after loading sucess all lights are now flashing like a christmas tree.

 

so i kindly request for the correct  tp_recovery.bin  for the TP-LINK TL-WR840N<W> BR V:4.0

 

 

  0  
  0  
#5
Options
Re:TpLink bricked router
2020-05-13 18:57:22
Hello i also have similar model TL-WR840N BR v:4.0   ISP customized firmware support  We bought them for our ISP and installed the customized bin, everytime we reset the router it reboots with our ISP configuration, but now we have a problem we need to change the customized data so we have created a new firmware.bin customized with new WIFI etc.. credentials.. we tried loading into the routers using the .bat files on the manuals  it finishes the process after 5 minutes. but after reseting the routers they allways come with initial customized data from our ISP. and not with the new backup data we tried loading.. so i tried to flash the original firmware via tftpd after loading sucess all lights are now flashing like a christmas tree. so i kindly request for the correct  tp_recovery.bin  for the TP-LINK TL-WR840N BR V:4.0
  0  
  0  
#6
Options
Re:TpLink bricked router
2020-05-14 04:37:45 - last edited 2020-05-14 04:41:11

@PortalNET 

 

Hi there

Which customised firmware did you use for your router?!!! OpenWRT?!!!  Use the latest version 19.07.2

if You want to return to TP-Link Original firmware,You should be aware that Original firmware contains with uboot (TL-WR840Nv4_BR_WISP_0.9.1_3.16_up_boot[180920-rel55953].bin) and needs to be stripped

You can use this command to make one

 

dd if="TL-WR840Nv4_oficial-da-tp-link.bin" of="tlwr840n-v4-stock.bin" bs=512 skip=1

 

Returning to Factory Firmware
To return to the factory version, it is necessary to modify the official firmware so that its header is deleted.

Download the official firmware from the TP-link page (taking care to download it in the right language, some models are country specific so you need to download the corresponding one).

     Now use the command below:

dd if = "TL-WR840Nv4_oficial-da-tp-link.bin" of = "tlwr840n-v4-stock.bin" bs = 512 skip = 1

The file tlwr840n-v4-stock.bin will be created, using the command above.
 Repeat the firmware burning process via the TFTP server, renaming the file tlwr840n-v4-stock.bin to tp_recovery.bin.
If the original firmware is burned without the above procedure, the device will end up being bricked.

Let me know

  0  
  0  
#7
Options
Re:TpLink bricked router
2020-05-14 04:59:08

@PortalNET 

 

http://www.mediafire.com/folder/zijo3fin2pbko/TL-WR840N_W_V4

 

I just stripped the original firmware with this command 

dd if="TL-WR840Nv4_oficial-da-tp-link.bin" of="tlwr840n-v4-stock.bin" bs=512 skip=1

let me know when you're done successfully

  0  
  0  
#8
Options
Re:TpLink bricked router
2020-05-16 17:23:50 - last edited 2020-06-26 21:52:41

I work on the web of best crossbow broadheads for deer & i have a office work which are devided into different peoples but our room is same ......If I use this device to spread connection to others then how,s the experience ? & also tell me about its frequency....

  0  
  0  
#9
Options
Re:TpLink bricked router
2020-06-27 15:23:08
Hi david Thanks for your quick reply yes i did managed to find later same day on another forum topic, mentioning that i had to change header of original stock firmware image, i have downloaded DD windows version and executed the steps necessary, it worked fine all routers bricked now alive. Aparently this steps are the same for all TL-WR840N versions v4,v5,v6 Anyways thanks for your input. cheers
  0  
  0  
#12
Options
Re:TpLink bricked router
2021-02-22 03:30:36

@David.1983 hello sir

would you pls stripping this firmware for me ? I already installed ur modified firmware but i need it in english version

 

http://www.mediafire.com/file/l4hgh02d2am9b53/TL-WR840N(EU)_V4_170421.zip/file

 

 

 

 

  0  
  0  
#13
Options
Re:TpLink bricked router
2021-02-23 05:34:09

@Benghazinho 

Did you flash BR Version?!!! Did it work? if your answer is YES just let me know

  0  
  0  
#14
Options

Information

Helpful: 0

Views: 9848

Replies: 14

Related Articles