@moloko i don't see that on mine, it takes me and shows IP address. connection type, etc. but nothing about turning off mesh technology. But i did make my guest network 5ghz only and that does seem to be solving my issue for now, as only the main router is within 5ghz shot of this tv. but if you could guide me with step by step i might try that as well. 

@moloko Would be very useful if someone can say how to access this 'mesh' option within the 'cog' for the relevant device?

I have the same problem with a tv which connects to one of the notably slower decos (as do a range of devices that aren't close to it) as opposed to the fastest/home deco which they are near which is a pain. Especially since use of video, etc is now critical.

QoS doesn't help as the slower deco performance is negating that in reality.

S

moloko wrote

Is there any way to force a device to connect to a specific deco? In my home office I have a TP-Link RE450 extending the Deco's WiFi network, but it always seems to connect to the deco furthest away from it rather (ideally) the one just a few meters away from it in the hallway - or even the (main) deco in the kitchen.

simoker wrote

@moloko Would be very useful if someone can say how to access this 'mesh' option within the 'cog' for the relevant device?

 

I have the same problem with a tv which connects to one of the notably slower decos (as do a range of devices that aren't close to it) as opposed to the fastest/home deco which they are near which is a pain. Especially since use of video, etc is now critical.

 

QoS doesn't help as the slower deco performance is negating that in reality.

 

S

moloko wrote

Is there any way to force a device to connect to a specific deco? In my home office I have a TP-Link RE450 extending the Deco's WiFi network, but it always seems to connect to the deco furthest away from it rather (ideally) the one just a few meters away from it in the hallway - or even the (main) deco in the kitchen.

  

@simoker I give step-by-step instructions in this reply. not sure how I can be much clearer than that tbh.

The 'mesh technology' toggle switch looks like this:

@moloko 

Thanks for your screenshot to clarify the instruction. It seems that many (including myself) are not seeing this toggle Mesh Technology. Hopefully it will be the best if Tplink techguy can come to address this issue. It seems this toggle only appears to specific Deco model. I'm using M5 + M3W (wall plug), not seeing this toggle. 

My printer is also having this buffering connection issue due to random connection to the far Deco, instead the nearer one. Really hope this toggle to be updated in all Deco models.

@TP-Link_Deco 

Hi 

Do you have any eta on this feature. I have the same problem on a newly purchased M4 system. I have computers that connect to the deco that is far away and this gives a very slow speed. I would say that this feature is very important for me in order to asure the fastest connection for my units. Pretty unusable as it is now.

Currently i have 1.4.x version on my decos.

Best regards

Lars

@moloko 

Hi

I tried the mesh toggle button last evening. For one unit i toggled of the mesh (it was connected to the right deco at that moment). But today....is connected on the wrong deco again. So this mesh toggle button does not work on my m4 system. Any ideas ?

@TP-Link_Deco please make a fix for this... I have the same issue. My television is 3 feet away from my main Deco M5, but mainly prefers to connect to my Deco in our bedroom. For that it needs go through a sealing and a wall! This results in the most terrible connection ever and it makes me regret buying the Deco system.

@TP-Link I did turn off the mesh once the tv was connected with the main Deco, but it still sometimes connects to the satellite Deco