TL-WA1201 AC1200 Wireless Access Point - Devices intermittently dropping packets when connected
PLEASE IGNORE THE MODEL SELECTION - I HAD TO CHOOSE ONE AND MY WIRELESS AP WAS NOT ON THE LIST
I've just installed a TL-WA1201 wireless AP into my home network and wish to use it's multi-ssid feature to broadcast 3 different ssids for the 3 VLANs set up on my network. I have it set up like this:
SSID 1 (2g+5g) - VLAN 20 - IP address 10.0.20.1
SSID 2 (2g+5g) - VLAN 30 - IP address 10.0.30.1
SSID 3 (2g+5g) - VLAN 40 - IP address 10.0.40.1
The issue is when connected to any of the 3 SSIDs devices get intermittent packet loss and I've not been able to find the cause. Things I have tried:
- Loading webpages - about 80% of pages won't load
- Pinging 1.1.1.1 - results in 30-70% packet loss
- Pinging google.com - results in 30-70% packet loss
- Pinging default gateway - results in 30-70% packet loss
- Connecting to every SSID with multiple different devices - issues persist
- Changing ethernet cables - issues persist
- Swapping from PoE injector to direct power - issues persist
- Connecting physically to each vlan with ethernet - no packet loss or internet issues whatsoever
Everything points to the TP link AP being faulty but before I return it I wondered if anyone here had any ideas?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I have for a good few months,
mainly just for a Ring door bell
TL-WA1201 v2.0
1.0.2 Build 20220103 rel.59353(4555)
Often Wifi dissappears, fortunately it seems the ring stays connected (I think) not used that much but normally online.
Ring does not work too well despite gigabit connections & strong signal but just assumed it was the ring as not sure they are great. Usually online but just a bit slow.
Anything else i.e. my phones, onces they move away to a different AP & come back within range, the TL-WA1201 v2.0 Wifi is not visible.
Have to re-start the AP.
SGS21Ultra & other android
Not too much of problem hence not tried much over the months I have owned it but is actually quite annoying.
I have it to restart each week, not sure want every day
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
The latest firmware for the V2 and V3 TL-WA1201 is available here: https://www.tp-link.com/au/support/download/tl-wa1201/
- Copy Link
- Report Inappropriate Content
@SnazzyJim this is only for v3 not v2. The beta is working fine for me and i am going to continue using it.
- Copy Link
- Report Inappropriate Content
While the link takes you to the default V3 page if you click the drop down and select V2, it will provide you with the latest V2 firmware which is: TL-WA1201(US)_V2_220103
Here is the V2 specific link: https://www.tp-link.com/au/support/download/tl-wa1201/v2/
- Copy Link
- Report Inappropriate Content
@SnazzyJim The firmware dated 2022-01-10 is still very very much broken. As stated in my previous post.
I thought that there was a newer firmware based on your comment. At this time the only reliable way to get my TL-WA120 v2 to work is with beta software.
Just to be as clear as possible. Any firmware released for this AP currently causes droped packets when using vlans. The fix is to use the beta firmware. Whatever fix is included in that release is NOT INCLUDED IN 2022-01-10 release.
- Copy Link
- Report Inappropriate Content
@casey-walt I was simply showing that there is a new firmware version regardless of if it fixes the VLAN issue, (I don't use VLANS and have no way of testing this function currently). That is good to know for everyone else on this thread to continue using the beta firmware that works with VLANS.
- Copy Link
- Report Inappropriate Content
It's been more than a year now, that a beta firmware fixing the problem has been released. How come it wasn't merged in the latest official firmware?
Can we have some news please? Using a beta firmware for VLAN is not acceptable, I expect more from TP Link. The latest official firmware comes with "Enhance device security", the beta firmware doesn't.
I have a V2 hardware version. Is it fixed in V3 maybe? I already lost time identifying the problem didn't come from my network configuration but from the TP Link device.
I would like to not also lose money by putting the device to trash.
Can I get an ETA for an official firmware with the fix included, or a refund, or another similar product with multi ssid/vlan capability?
Waiting for feedback from TP Link.
Thank you
- Copy Link
- Report Inappropriate Content
Hello everyone,
Thank you for your feedback with the release of TL-WA1201 V2 official firmware, we have shared your feedback to our team to push the test of the beta and release the new firmware that contains the fix.
From the updated news support got, there were some fixes that are being tested, and the estimated date of TL-WA1201 new firmware is around Q4.
As for now, it is recommended to use the previous beta firmware if you experience unstable issue in Multi SSID mode.
Thank you again for your feedback and patience ! If there any updated information, we will let you in first time.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 9
Views: 30396
Replies: 106
Voters 5
