No Internet Connection - AC750 - Archer C20
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Post configuration i am able to connect to the wifi on my laptop but unable to browse internet. I spoke to my ISP regarding the same but there is no issue on their end. I was able to use wifi and browse internet for first 30 mins of configuration but post that no Internet connection. I tried resetting the router multiple times but no luck.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Kindly refer to this FAQ for the basic troubleshooting: What should I do if I cannot access the internet through Wi-Fi router?
- Copy Link
- Report Inappropriate Content
I have the same issue.
i completed the configuration with everything Ok. but when i tried to access the net it keeps the problem connected to the network but with no internet. my other devices can navigate in the net, but the ones that are in the extended network doesn't.
can anyone tell me how to solve it?
- Copy Link
- Report Inappropriate Content
What do you mean by extended network? Does this Archer C20 work as an extender or Access Point? How does it connect to the main router? You may refer to the previous suggestions provided by Solla-topee.
- Copy Link
- Report Inappropriate Content
I configured the archer c20 v5 as range extender. The configuration was completed with no issues. When I try to access the extended net I created my devices connect to the net "extended net" , but this network is not connected to Internet.
If I go to tplink net configuration page, in "network" it keeeps me showing that there is no conection to Internet, which is false, cause if I connect to the main network, (the one I want to extend) I can navigate normally.
The net sometimes connect, but becomes intermitent and too slow and block the speed of the main one.
Also I made the speed test for the main network and gave me 58 MBps , when I turn on the tp link drops the main one to 3 MBps.
I want to know what is happening, because I have another archer c20 and this doesnt Happen with thah one.
- Copy Link
- Report Inappropriate Content
What is the distance between the Archer C20 and your main router? Are they connected via 2.4G or 5G? How about the signal at the location of the C20 when searching for the main Wi-Fi? If the signal from the main Wi-Fi is poor, you will not have a stable connection between the C20 and the main.
BTW, what is the model number of the main router? You may also try to modify its wireless settings, such as wireless channel and channel width, then reconnect the C20 to that.
- Copy Link
- Report Inappropriate Content
I put The archer c20 near the router the signal is more than 90% and the problem is the same.
The módem of the main network is an arris tg2482A provided by the Internet company.
As I said., I have another c20 and this works well. I Just configure it and it works as I need. But this archer c20w I configure it but it doesnt work. Fotñr the devices The extended network its ustable, and when the c20 is activated the speed of the entre network drops. Evrn the speed of the principal network...
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Thats how it looks my configuration window. I can navigate on the net in all my devices connected to the router, so the connection to internet is OK, but when its the archer On, it blocks the connection, and i cannot navigate .
- Copy Link
- Report Inappropriate Content
If that is the case as you described, you can try to downgrade the firmware of the one that is currently not working to the 0.9.1 4.16 v0001.0 Build 190103 Rel.45825n(4553), then confirm how it goes.
If that still doesn't help at all, please contact the local tech support to confirm if there is a hardware issue with the specific unit:
https://www.tp-link.com/en/support/contact-technical-support/#Hotline-Support
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 8821
Replies: 9
Voters 0
No one has voted for it yet.