Archer C6 Firmware update 1.3.5 is live
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Is it stable? Is it finally time to update from 1.2.1?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@dr.lakshay @OnlyCORE @MushyPotato
Hello all, sorry to respond late.
For those who still encounter issues with the latest 1.3.5 official firmware on the Archer C6(EU)_V2, please kindly verify what is your exact issue but not just stating still issues or still not working, which will not help at all. It will be more convenient for us to help those who come across real issues more efficiently based on the sufficient information they provided, we hope our customers will understand. Thanks.
If there is still an issue or issues with the latest 1.3.5 beta, please confirm basic info as below:
1. What is the exact issue now, is the 2.4G wireless still unstable or 5G unstable or all 2.4G/5G/Wired connections are having issues?
2. Are all wireless devices or both wired and wireless devices experiencing the same dropout or just some special or old clients? When they got disconnected, is the wireless network of the Archer C6 still broadcasting or the wireless network is no longer available on all other devices as well?
3. If only the 2.4G wireless or 5G is not stable, try to modify the wireless settings on the Archer C6 first, such as wireless channel, channel width, which would help in some cases:
https://www.tp-link.com/support/faq/2292/
Thanks again for your time and patience.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Kreco ummm... what problems are you facing exactly?
- Copy Link
- Report Inappropriate Content
Ping jumps, lost packets for 5ghz. It started with 1.3.0, if I remember correctly beta 1.3.1 fixed the problem, then again 1.3.4 with the problem, then beta 1.3.6 fixed it, now the same with 1.3.5 :)
- Copy Link
- Report Inappropriate Content
@OnlyCORE Why the hell would they release 1.3.5 to stable with the same problem if 1.3.6 beta is good???
- Copy Link
- Report Inappropriate Content
Is possible in this version disable OneMesh function?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I am still using 1.2.1 because on newer version are not changing some parameters like channel width after setup in GUI, and also when I disable for example 5 GHz, router still emiting hidden channel regarding one mesh. I am not understand, why is not possible to disable all transmission within wirelles schedule period.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I also wanted to go back to 1.2.1 yesterday, but even when using TFTP, it was 1.3.5 again. You must first upload OpenWrt via TFTP, then via factory TFTP 1.2.1. I didn't feel like it so I put the beta back in via 1.3.6. link: https://static.tp-link.com/2020/202006/20200611/ArcherC6v2(EU)_debug.zip
- Copy Link
- Report Inappropriate Content
1.3.5 killed my 5 GHz again. It was fine in 1.3.4. Come on TP-Link.
EDIT: Reverted to 1.3.4, still same. Going to try to downgrade to 1.3.1.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 9942
Replies: 30
Voters 1
