How Mesh working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How Mesh working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How Mesh working
How Mesh working
2020-11-16 08:02:00
Model: Deco M9 Plus  
Hardware Version: V2
Firmware Version: 1.2.12 Build 20191014 Rel. 42025

HI All,

 

Just to find out how mesh work in TPLINK. I found my home network keep interrupted and suspect the mesh connection between AP.

 

I am using M9Plus which have 3 Radio. Are they using WIFI radio for mesh? if so, can we select or not using 2.4. I guess it due to 2.4 noise near my home.

 

Thanks

  0      
  0      
#1
Options
1 Reply
Re:How Mesh working
2020-11-19 11:01:53

@YHL 

Good day,

Thank you very much for your time and patience.

All three radios could be used to create Wi-Fi backhaul between Deco M9+.

But we could not disable one radio of three.

 

Since they would affect the mesh communication between Deco units, not the wireless clients’ connection to Deco, as long as the LED lights on the satellite Deco units are green, the wireless backhaul would be fine.

So you could try to disable the 2.4ghz of the Deco to reduce the interference, so that it would not broadcast 2.4ghz signal for the clients.

 

Thanks a lot.

  0  
  0  
#2
Options

Information

Helpful: 0

Views: 461

Replies: 1

Related Articles