Home Network Community > All Threads > Manual Band Selection for 4G Wi-Fi Routers and LTE Gateways
< All Threads

Solution Manual Band Selection for 4G Wi-Fi Routers and LTE Gateways

1141516...

Solution Manual Band Selection for 4G Wi-Fi Routers and LTE Gateways

309 Reply
Re:Manual Band Selection for 4G WiFi Routers
2021-06-21 04:00:40

Hi @Kevin_Z.

 

Thanks for your advice..

I need to migrate to MR600..

  0  
  0  
#157
Options
Re:Manual Band Selection for 4G WiFi Routers
2021-06-21 07:33:43

@Kevin_Z Could you guys allow Carrier Aggregation support on "Vi India" it uses  B1, B3 combination.... 

My mobile device aggregates successfully... But TP Link Archer MR600 doesn't seem to aggregate.... I even tried locking bands on beta firmware too, no improvement... 

 

I kindly request you to allow 1,3 CA at firmware level

Thanks in advance! 

  1  
  1  
#158
Options
Re:Manual Band Selection for 4G WiFi Routers
2021-06-21 08:25:18

@KGVarunkanth 

 

Hi, actually selecting the band manually is to inform the 4G base station the band we would like to use, but it is decided by the base station whether and how the bands will be aggregated. We are unable to force them to work on specific band combinations.


It is recommended to choose the band combinations with better speed and stable connection, if the signal is not very stable, you could also leave it on Auto so that it will change to other band automatically when specific band has weak or no signal.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#159
Options
Re:Manual Band Selection for 4G WiFi Routers
2021-06-21 08:38:22
I was told that CA 1+3 is a hardware limitation of MR600 (V1). It should be supported on V2
  0  
  0  
#160
Options
Re:Manual Band Selection for 4G WiFi Routers
2021-06-21 13:45:12

@Kevin_Z 

Hey there! 

Thanks for your reply.... 

Even auto mode doesn't seem to work here :(

I just requested cause my mobile was able to aggregate successfully on 1+3 band 

If its allowed at software level... Maybe something interesting Myt happen... 

  0  
  0  
#161
Options
Re:Manual Band Selection for 4G WiFi Routers
2021-06-21 13:46:51

@john.awad My bad I brought v1 mr600, 

If its hardware... Then no way that I could use ca 1+3 on Vi India Sim :(

  0  
  0  
#162
Options
Re:Manual Band Selection for 4G WiFi Routers
2021-06-21 14:41:39

@KGVarunkanth Yeah, see if you can exchange it with a V2.

  0  
  0  
#163
Options
Re:Manual Band Selection for 4G WiFi Routers
2021-06-21 17:49:41

@john.awad I think exchange is not possible tho.... 

Cause its been so many months since I brought it 

  0  
  0  
#164
Options
Re:Manual Band Selection for 4G WiFi Routers
2021-06-23 20:26:58
I have bought router MR600 only for the Carrier Aggregation feature.I am facing same issue. I have checked with airtel and Jio.It is router problem. In router, manual network band selection is not working. But auto band selection is working ..it depends on ISP provider criteria. Airtel CAT band-3,40 . Dear TP link, Please update once fix available for manual network band selection in 4G+ Cat6 AC1200 Wireless Dual Band Gigabit Router Archer MR600(Version 2) Issue firmware: Archer_MR600v2_1.3.0_0.9.1_[210208-rel61056]_up_boot_Release_2021-02-08_17.06.35.bin
  0  
  0  
#165
Options
Re:Manual Band Selection for 4G WiFi Routers
2021-06-24 03:43:54

@JJoseph 

 

Hi, MR600 v2 has already supported the band selection feature, you can find it on the web GUI Advanced >Network >Internet page, when you choose the band, it will search for the available bands, choose one that is labeled with your ISP.

 

If you still cannot find the option to choose the band manually, please show us the screenshot on the Network page, we can confirm.

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#166
Options
1141516...

Tags

Highlighted Thread Official Band Selection
Related Articles
Manual Band selection
761 0
Manual dual band selections for 4g+
1410 0
Manual band selection
1690 1
4G LTE Band Selection
4735 1
Manual band selection for my 4G router MR 400 V1
1309 0
Archer MR500 carrier agregation and manual band selection
1465 3
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.