Home Network Community > All Threads > Setting static IP for Deco M9 plus when used as access point?
< All Threads

Setting static IP for Deco M9 plus when used as access point?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Setting static IP for Deco M9 plus when used as access point?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Setting static IP for Deco M9 plus when used as access point?
Setting static IP for Deco M9 plus when used as access point?
2023-02-01 18:18:27
Tags: #Access Point Mode #Static IP
Model: Deco M9 Plus  
Hardware Version: V2
Firmware Version: 1.5.6 Build 20211018 Rel. 35617

Just boght and are setting up the 3 M9 Plus units into my network.
I have made the first setup and everything is up and running but I want to change so that the units have static IP adresses.

My Setup is WAN -> Clavister Firewall -> M9 Plus

The primary unit is connected to ethernet from the firewall and working as an access point nut I can't seem to find a way to not use DHCP when working as AP?

Please confirm if I am missing something or if this ends up as an Feature Request...

I have as much stuff as possible using static IP when it is regarding infrastructure...

  0      
 
  0      
 
#1
Options
5 Reply
Re:Setting static IP for Deco M9 plus when used as access point?
2023-02-01 18:40:10
This is Not possible with deco devices. Only chance to get this working was at my FritzBox (DHCP-Server) add new Device (Deco) by Mac-Adress. After that your fritzbox will give your deco your Ip but it‘s still getting from DHCP Server
  0  
  0  
#2
Options
Re:Setting static IP for Deco M9 plus when used as access point?
2023-02-01 18:43:53

  @Devil1988 

 

So then this will go into "Feature Request" then...
Since it is possible when using M9 as router it should only be a firmware upgrade to make it possible.

Thank you for fast reply! Much appreciated!

  0  
  0  
#3
Options
Re:Setting static IP for Deco M9 plus when used as access point?
2023-02-01 20:44:55
Yes of course but I‘m waiting for this feature nearly two years on my x60
  0  
  0  
#4
Options
Re:Setting static IP for Deco M9 plus when used as access point?
2023-02-02 02:24:34

  @Devil1988 

Hi, you might want to try the 1.6.0 beta firmware for Deco M9 plus which allows you to turn off smart DHCP under Access Point mode:

Deco M9 Plus 1.6.0

 

Thank you very much.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.
  0  
  0  
#5
Options
Re:Setting static IP for Deco M9 plus when used as access point?
2023-02-02 05:47:11
Ah M9 get‘s such an Beta but not x60 and P9? Sorry your devs are idiots
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 809

Replies: 5

Tags

Access Point Mode
Static IP
Related Articles
Deco M9 plus IP setting
2047 0
Static IP for Deco M9 Plus satellite
722 0
Deco M9 Used as Ethernet Bridge
2638 0
Deco M9 Plus Static Routes
2095 1
Questions about Deco M9 Plus
946 0
Deco M9 Plus V2
1400 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.