Home

Forums

Stories

Knowledge Base

Home Network Community > All Threads > Deco X90 OpenVPN cannot see other devices on the network.

< All Threads

Deco X90 OpenVPN cannot see other devices on the network.

adriancttnc

2024-08-12 07:46:33 - last edited 2024-08-19 08:45:56

Posts: 1

Helpful: 1

Solutions: 0

Stories: 0

Registered: 2024-08-12

Deco X90 OpenVPN cannot see other devices on the network.

2024-08-12 07:46:33 - last edited 2024-08-19 08:45:56

Tags: #Network Connectivity #VPN

Model: Deco X90

Hardware Version: V1

Firmware Version: 1.2.6 Build 20231225 Rel. 33179

I've setup VPN from the Deco app using the OpenVPN option and I can export the config to my client devices and I can connect to the VPN network, however, I cannot see any other devices on the LAN.

I've read on multiple forums that i should put `route 10.8.0.1 255.255.255.0 192.168.68.1` in the client config file but no one specifies where to put the damn thing.

Anyway, I've put it in the client config file in multiple places and it doesn't work. OpenVPN client returns an error `[route] [192.168.68.1] [255.255.255.0] [10.8.0.1]: tun_prop_error: route is not canonical`.

If I connect multiple devices on the VPN I can ping the 10.8.0.x IP, but 192.168.68.x gets timeouts.

1 Accepted Solution

David-TP

2024-08-13 09:40:46 - last edited 2024-08-19 08:45:56

Posts: 12361

Helpful: 1711

Solutions: 1120

Stories: 9

Registered: 2020-04-14

Re:Deco X90 OpenVPN cannot see other devices on the network.-Solution

2024-08-13 09:40:46 - last edited 2024-08-19 08:45:56

@adriancttnc

Hi, Thank you very much for your feedback.

Please refer to this FAQ to modify the network settings on the client device first:

Why can’t I access or discover certain devices over VPN？

If it didn't help, could you please send a copy of the OpenVPN config file to support.forum@tp-link.com?

Wait for your reply and best regards.

Check What's Currently Going on With Deco Deco Early Access Firmware Open for Test! Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.

Recommended Solution

1 Reply

David-TP

2024-08-13 09:40:46 - last edited 2024-08-19 08:45:56

Posts: 12361

Helpful: 1711

Solutions: 1120

Stories: 9

Registered: 2020-04-14

Re:Deco X90 OpenVPN cannot see other devices on the network.-Solution

2024-08-13 09:40:46 - last edited 2024-08-19 08:45:56

@adriancttnc

Hi, Thank you very much for your feedback.

Please refer to this FAQ to modify the network settings on the client device first:

Why can’t I access or discover certain devices over VPN？

If it didn't help, could you please send a copy of the OpenVPN config file to support.forum@tp-link.com?

Deco X90 OpenVPN cannot see other devices on the network.

Deco X90 OpenVPN cannot see other devices on the network.

Information

Voters 1

Tags