Home Network Community > All Threads > TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode
< All Threads

Official Release TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode

Official Release TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode

Official ReleaseTL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode
TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode
2024-09-03 07:05:37 - last edited 2024-11-29 11:14:51
Tags: #Highlighted Thread #Official #EasyMesh
Model: TL-WA3001  
Hardware Version: V1
Firmware Version: 1.1.0 Build 20240814

This Article Applies to:

TL-WA3001 V1.0

TL-WA3001 V1.20/V1.26

 

New Features and Enhancements:

 

1. Added the support of Easymesh (Controller Mode) in AP mode.

2. Added Speed Limit in AP mode.

3. Added Guest Network in AP mode.

4. Added Wireless Schedule in AP mode and Multi-SSID mode.

5. Optimized the Network Map page display topology in AP mode and Multi-SSID mode.

6. Added the support of Tether APP in RE mode and Multi-SSID mode.

 

Notes

 

This version of firmware cannot be degraded to the previous version.

 

 

Firmware Download

 

You should be able to detect this new official version on the Tether App/Web management page of the WA3001. Or, you can download it from the local official website and upgrade the firmware manually.

 

Direct Firmware Download Link

TL-WA3001_V1.20/V1.26_1.1.0 Build 20240814 (Official version)

 

Additional Information

As always, we value your feedback. If somehow you encounter an issue during or after the firmware upgrade, it's suggested to comment below with the following info. Your input helps us continue to improve and provide the best possible products and support.

  • Model, hardware version, and firmware version of your device.
  • Detailed issue description, and provide more information on the specific conditions that seem to trigger the problem.
Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  1      
 
  1      
 
#1
Options
10 Reply
Re:TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode
2024-10-07 23:03:52

  @Kevin_Z 

So with this firmware, I should be able to have 2 TL-WA3001 APs connected by Ethernet to a router, and one of them can be the primary Easymesh device?

  0  
  0  
#3
Options
Re:TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode
2024-10-09 08:00:21 - last edited 2024-11-29 11:25:45

 

NickOS wrote

  @Kevin_Z 

So with this firmware, I should be able to have 2 TL-WA3001 APs connected by Ethernet to a router, and one of them can be the primary Easymesh device?

 

@NickOS 

 

As mentioned in the first release note, WA3001 supports EasyMesh only when it works in Controller Mode. In other words, you can only have one WA3001 in the mesh network and it must work as the controller.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options
Re:TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode
2024-10-27 04:25:58 - last edited 2024-10-27 04:27:50


  @Kevin_Z 

Does this FW update allowed Ethernet backhaul on the TL WA3001? I am interested in topo 3 of this Article

  0  
  0  
#5
Options
Re:TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode
2024-10-28 06:12:37

 

Ic1111 wrote


  @Kevin_Z 

Does this FW update allowed Ethernet backhaul on the TL WA3001? I am interested in topo 3 of this Article

 

@Ic1111 

 

Yes. As you can see from the firmware release notes, it supports EasyMesh when working in AP Mode. That means it can establish a mesh network with other EasyMesh Routers or extenders when it works in AP Mode.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#6
Options
Re:TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode
2024-10-29 14:16:18 - last edited 2024-10-29 14:17:58

  @Kevin_Z 

Two questions 

1) if there is planned support for easymesh on the WA3001, why doesn't it appear on the list of supported devices as "planned", there isn't even a category for access points

 

2) when will this FW be pushed to the official FW? I am interested in some of these features, (not easymesh, at least not in the near term with the current available HW) but I don't want to mess with beta FW 

  0  
  0  
#7
Options
Re:TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode
2024-10-30 08:36:34

 

Ic1111 wrote

  @Kevin_Z 

Two questions 

1) if there is planned support for easymesh on the WA3001, why doesn't it appear on the list of supported devices as "planned", there isn't even a category for access points

 

2) when will this FW be pushed to the official FW? I am interested in some of these features, (not easymesh, at least not in the near term with the current available HW) but I don't want to mess with beta FW 

 

@Ic1111 

 

Once the official firmware is ready, we will add it to the EasyMesh Product List. Thanks for your feedback.

 

Regarding the ETA of the official firmware, I'm afraid I cannot provide a definitive timeline. The release may take longer than expected, as our team is committed to ensuring that the official software meets the highest standards of performance and reliability.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#8
Options
Re:TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode
2024-11-09 14:27:31

  @Kevin_Z 

  0  
  0  
#9
Options
Re:TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode
3 weeks ago - last edited 3 weeks ago

  @Kevin_Z 

 

Hi,

 

I installed this firmware from the official release channel. Hardware details as follows:

 

Firmware Version:

1.1.0 Build 20240814 rel.62793(4155)

Hardware Version:

TL-WA3001 v1.0

 

When setting up a Guest Network in AP mode, the Guest Permissions options don't seem to do anything. Whether they are ticked or not, devices on the Guest Network can still see other devices (ping) and access LAN resources (smb shares).

I found similar threads here: https://community.tp-link.com/en/home/forum/topic/673612 and https://community.tp-link.com/en/home/forum/topic/589202, which talk about the Guest Network permissions not working in AP mode for a router. If the same thing applies here, shouldn't the Guest Permissions options not even be in the WAP UI, as the Guest Network is only available in AP mode?


Thanks for your help.

  0  
  0  
#10
Options
Re:TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode
3 weeks ago

@Gtlink 

 

Thank you very much for your feedback.

 

I will forward your feedback to the relevant department and request a review of these designs and the web GUI configuration.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#11
Options
Re:TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode
2 weeks ago

  @Kevin_Z 

Re the comment above about the guest network 

I updated my FW as well and tested the guest network, my router is a mikrotik Hex S, and I saw that devices on the guest network could not ping devices on the main network, but devices on the main network could ping devices on the guest network, which seems to me to be proper functionality 

 

Also, when will the page about supported easymesh products be updated with the 3001?

 

Also, why are there so many HW versions of the 3001, it's only been out one year? It wasnt obvious that I could update the FW from the rules that tp link gives in deciding whether my HW could accept that FW.

 

I have V1.0, and the release was for V1.20/V1.26, so those don't technically match up

  0  
  0  
#12
Options

Information

Helpful: 1

Views: 1665

Replies: 10

Tags

Highlighted Thread Official EasyMesh
Related Articles
TP-LINK TL-WA3001
855 0
How to extend the Mutil SSIDs with vlan of TL-WA3001?
493 0
Guest Network limit speed
561 0
How to limit the speed or bandwidth of the guest network
2860 0
Setting up speed limit on guest wifi
1035 0
Limit speed ?
1568 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.