Deco X20 is Slow when I connect to NordVPN

Deco X20 is Slow when I connect to NordVPN

Deco X20 is Slow when I connect to NordVPN
Deco X20 is Slow when I connect to NordVPN
2024-10-08 14:21:32 - last edited 4 hours ago
Model: Deco X20  
Hardware Version:
Firmware Version: 1.2.1

so my deco x20 is working fine when it is not connected to Nordvpn but once it on it drops from 200Mbps to 13Mbps, what seems to be the problem?

  1      
  1      
#1
Options
1 Accepted Solution
Re:Deco X20 is Slow when I connect to NordVPN-Solution
2024-10-09 07:17:14 - last edited 4 hours ago

  @HSKA 

Hi, welcome to the community.

I think it is almost what we could expect from the OpenVPN Client connection speed. Deco is plan to support WireGuard VPN protocol(some models have added this feature already such as Deco X20/60_V4,Deco X50_V1/V1.2) which will greatly improve the VPN connection speed.

Thank you very much and best regards.

 

Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:Deco X20 is Slow when I connect to NordVPN-Solution
2024-10-09 07:17:14 - last edited 4 hours ago

  @HSKA 

Hi, welcome to the community.

I think it is almost what we could expect from the OpenVPN Client connection speed. Deco is plan to support WireGuard VPN protocol(some models have added this feature already such as Deco X20/60_V4,Deco X50_V1/V1.2) which will greatly improve the VPN connection speed.

Thank you very much and best regards.

 

Recommended Solution
  0  
  0  
#2
Options
Re:Deco X20 is Slow when I connect to NordVPN
18 hours ago

Hi,

I cannot find information about theoretical speed when Wireguard is used for Deco X20. Could you share such information?

Second question is Deco X20 supports VLANs 802.11q?

Kind regards,
Marcin

  0  
  0  
#3
Options
Re:Deco X20 is Slow when I connect to NordVPN
4 hours ago

  @marcin1606 

Hi, Thank you very much for the message.

Through the WireGuard VPN protocol, the expected VPN connection speed would be similar to what you are supposed to receive from Deco without the VPN connection. In other words, there isn't a speed limitation on the Deco side.

Deco supports VLANs 802.11q (only in Wireless Router mode).

Best regards.

 

  0  
  0  
#4
Options