Home Network Community > All Threads > Deco PX50 stared crashing/rebooting and network just stops
< All Threads

Deco PX50 stared crashing/rebooting and network just stops

Deco PX50 stared crashing/rebooting and network just stops

Deco PX50 stared crashing/rebooting and network just stops
Deco PX50 stared crashing/rebooting and network just stops
a week ago
Tags: #Powerline Backhaul #Network Connectivity #Access Point Mode
Model: Deco PX50  
Hardware Version: V1
Firmware Version: 1.2.3 Build 20240724 Rel. 28307

 

My Deco PX50 units have been solid for months, but since last week they started crashing once or twice a day.

 

They just stop working, wifi SSID sometimes disappears.

 

Before they were setting wifi+PLC between each other, but since they started crashing they seem to be only doing Wifi backhaul.

 

The main deco unit has some noise that sounds like interference, but I tried some other sockets, and still similiar.

 

Is there any logs or something that we can check or any known issue?

  1      
 
  1      
 
#1
Options
2 Reply
Re:Deco PX50 stared crashing/rebooting and network just stops
a week ago

  @ricardonadao 

Hi, Thank you very much for the feedback.

Have you tried to reset the Deco PX50 once and set it up again?

-It is also suggested to set a different Deco PX50 as the main Deco(temporarily unplug the original "main" PX50). Then test the new Mesh system with only 2*Deco PX50s to see whether it could hold a stable connection.

 

Wait for your reply and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Deco PX50 stared crashing/rebooting and network just stops
a week ago - last edited a week ago

Just reconfigured the network from scratch.

 

Used another unit as the main.

Setup the 2nd unit.

 

The first 2 units connected nicely and with PLC+Wifi as expected.

 

Was able to add the "faulty unit" that starts doing "interference noise" as soon as it gets powered on, but after sometime it starts rebooting itself, so at the moment left only 2 units online and working with support to see what to do with it.

  0  
  0  
#3
Options

Information

Helpful: 1

Views: 86

Replies: 2

Tags

Powerline Backhaul Network Connectivity Access Point Mode
Related Articles
Deco PX50 not using Powerline backhaul
24253 4
Deco X73-DSL with PX50
508 0
DECO PX-50 works in PLC Mode with DECO P9
56 0
PX50 Powerline backhaul not working
1399 1
"IoT Network" option not available on Deco PX50 App
956 0
PX50 - PLC problem
389 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.