Speed Drops on Archer C80 Router After 8-9 Hours (WAN Replug Resolves Issue)

Speed Drops on Archer C80 Router After 8-9 Hours (WAN Replug Resolves Issue)

Speed Drops on Archer C80 Router After 8-9 Hours (WAN Replug Resolves Issue)
Speed Drops on Archer C80 Router After 8-9 Hours (WAN Replug Resolves Issue)
Monday
Tags: #Network Connectivity #Internet Speed
Model: Archer C80  
Hardware Version: V20
Firmware Version: 1.14.3 Build 241025 Rel.69449n(5553)

I have a 300 Mbps internet connection and use the TP-Link Archer C80 router. After approximately 8-9 hours of usage, the internet speed drops significantly to around 90-100 Mbps. However, when I unplug and replug the WAN cable, the speed restores to 300 Mbps temporarily before the cycle repeats.

Could this be due to a firmware or hardware-related issue? Has anyone else experienced a similar problem, and are there any permanent solutions to prevent the speed drop?

Let me know if additional information is required.

  0      
  0      
#1
Options
1 Reply
Re:Speed Drops on Archer C80 Router After 8-9 Hours (WAN Replug Resolves Issue)
Tuesday

Hi  @HimanshuRahi,

When the issue occurs, please log in to the web interface of router. Please check what is the negotiation speed of WAN, LAN port?

Go to Network Map-->Archer C80-->Ethernet Status

 

Auto-negotiation allows a port on a router to communicate with the wired device to determine the optimal duplex mode and speed for the connection. 
To enable the Auto-Negotiation on the internet port, Please log into your router's web management page by visiting: https://tplinkwifi.net
Then go to Advanced->Network->Internet-> Internet Port Negotiation Speed Setting and select "Auto-Negotiation". You can also set the port to "1000Mbps Full Duplex".

  0  
  0  
#2
Options

Information

Helpful: 0

Views: 43

Replies: 1

Tags

Network Connectivity
Internet Speed
Related Articles