Home

Forums

Stories

Knowledge Base

Home Network Community > All Threads > BE900, Epson printer connected to wireless network but not showing up on clients tab

< All Threads

BE900, Epson printer connected to wireless network but not showing up on clients tab

Dan-_

Yesterday - last edited Yesterday

Posts: 2

Helpful: 1

Solutions: 0

Stories: 0

Registered: 2024-12-23

BE900, Epson printer connected to wireless network but not showing up on clients tab

Yesterday - last edited Yesterday

Tags: #Network Connectivity #Access Control #Parental Control

Model: Archer BE900

Hardware Version: V2

Firmware Version: 1.1.3 Build 20241115 rel.17800(4155)

I wish to isolate the printer to only the wireless network, no internet whatsoever.

It is connected.

I can print through it wirelessly no problems.

I cannot see it on any connected client tab or anywhere else.

It is an Epson workforce pro.

It has a manually assigned ip that falls into the current network range of all the other devices.

How do i see it, as i know it is connected wirelessly.

1 Accepted Solution

terziyski

LV7

Yesterday - last edited Yesterday

Posts: 7141

Helpful: 5351

Solutions: 1220

Stories: 7

Registered: 2013-10-12

Re:BE900, Epson printer connected to wireless network but not showing up on clients tab-Solution

Yesterday - last edited Yesterday

@Dan-_

If you've set your printer with a static IP address, try setting it to receive its IP address via DHCP (automatically).

I believe then you should be able to see the printer in the router clients list.

You can also use an Address Reservation feature to assign a permanent IP address for the printer.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".

Recommended Solution

2 Reply

terziyski

LV7

Yesterday - last edited Yesterday

Posts: 7141

Helpful: 5351

Solutions: 1220

Stories: 7

Registered: 2013-10-12

Re:BE900, Epson printer connected to wireless network but not showing up on clients tab-Solution

Yesterday - last edited Yesterday

@Dan-_

If you've set your printer with a static IP address, try setting it to receive its IP address via DHCP (automatically).

I believe then you should be able to see the printer in the router clients list.

You can also use an Address Reservation feature to assign a permanent IP address for the printer.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".

Information

Helpful: 1

Replies: 2

BE900, Epson printer connected to wireless network but not showing up on clients tab

BE900, Epson printer connected to wireless network but not showing up on clients tab

Information

Voters 1

Tags