OpenVPN server on Archer AX73
Hi,
I've configured the OpenVPN server on the router (as I've done many times with previous models). When I launch the client from a remote device, be it a phone, computer, etc., it connects perfectly, but that's about it. I can't access local network resources, the internet, or the router's local IP address to enter the configuration. I've discovered that if I downgrade the firmware, it works for a while until it returns to the same situation again. When I upgrade again, it fixes itself, but only momentarily. Any thoughts?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @Pascalito,
If you're experiencing problems with the VPN Server, we recommend reviewing the following troubleshooting articles for assistance:
For VPN Server issue on TP-Link Router: VPN Server Is Not Working Properly on TP-Link Wi-Fi Routers
Please provide the following information for further troubleshooting:
1. Model no., hardware and firmware version of your TP-Link router, model no. of the VPN client device
2. Your specific network topology and what you want to achieve via VPN
3. The current problem phenomenon
4. The .ovpn file for OpenVPN or .conf file for WireGuard VPN, and screenshots of all VPN Settings
5. Log file of the VPN client if you have
We have reported the issue to the support engineers, they will likely reach out to you via email to continue to troubleshoot your issue. Please check your email box and confirm.
- Copy Link
- Report Inappropriate Content
Hi @Pascalito,
If you're experiencing problems with the VPN Server, we recommend reviewing the following troubleshooting articles for assistance:
For VPN Server issue on TP-Link Router: VPN Server Is Not Working Properly on TP-Link Wi-Fi Routers
Please provide the following information for further troubleshooting:
1. Model no., hardware and firmware version of your TP-Link router, model no. of the VPN client device
2. Your specific network topology and what you want to achieve via VPN
3. The current problem phenomenon
4. The .ovpn file for OpenVPN or .conf file for WireGuard VPN, and screenshots of all VPN Settings
5. Log file of the VPN client if you have
We have reported the issue to the support engineers, they will likely reach out to you via email to continue to troubleshoot your issue. Please check your email box and confirm.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 116
Replies: 1
Voters 0
No one has voted for it yet.