@aakash12123 You will need a portable 4g Router. Something like the M7200 or M7350 That will allow you share a WiFi connection using a 4g backbone

@Kryten602 The switch wouldnt have been affected by the strike also? Have you tried connecting the printer directly to the Deco to see if it pulls and address that way? This should just work as you...

@Tim-Senior The only way to see if an AP is too close to another is via RSSI or DB readings. Ideally you want to be standing under AP1 and see AP2 at around -65db, that allows a good margin of error....

@Pksparks To give TP Link the credit due, their controller updates do generally bring a lot of positive new features to the system. While far from perfect, the direction its been taking and progress...

@PHTP EAPs are designed to be end points on the network, each one cabled back to the local switch. Thats the optimal setup, however its not always required. Chaining them together will work, just can...

@janeks Sadly not, it is on AUTO all the time so will decide itself when to switch between 20 / 40mhz To be perfectly honest 2.4ghz is so flooded in general that you may a well use 40mhz to grab as...