@Mesh_Man In the app run the network optimiser, this should rescan the airspace and choose a better channel for you. May help! Its usually caused by a neighbout switching channel to the same one as...

@janeks If you notice the MAX DATA RATE on the dual channel ones is 360 vs 156, its down to channel widths. The channel width will switch from 20mhz to 40mhz depending on what is connected too it at...

@PHTP In theory this should be possible, can see no reason why not. However, its far from the best practice was to set this up.

@dbSoft Thats a VERY hard question to answer if honest YES the EAP225 can work stable in a Mesh, used it a few times and generally it works well. However Lag, well that is dependent on what you...

@SSCHRUMP This is not the EAP causing this, the EAP doesnt have a DHCP server and wont issue any addresses. It just forwards what it is told to forward. Sounds like you have 2x DHCP servers on your...

@jwaltrip The new controller will see the devices as "Managed by other", namely its aware of them but wont take control of them You will need to reset them sadly to break the link to the old...