@crater6000 When two modems are connecting to the WAN ports and the internet is disconnected, the status on two WANs is linkup or linkdown? Can you still see any WAN IP address on two WAN ports? Do...

@Jimmyhall82 If you want to set up a static IP address for the EAP, you can go to "Device--APs--Config--IP Setting--Static". This is the option to set up a specific IP address for the EAPs managed...

@Tyler1487 You can set up the DHCP lease time to a smaller number, for example, 1 or 2 minutes. When it is time to change the IP address, monitor if the device can get internet. 1. First, check the...

@xperiments When the load balance is disabled, the data packets will pass through WAN1 and WAN2 randomly. When the load balance is enabled, the router will decide which WAN entry the data packets...

@4uba On Omada Controller, one SSID can only set up one VLAN ID. If you want to differentiate the clients, you may need to create more than one SSID with a related VLAN ID, or just set up a different...

@Tate321 The normal connection is modem---router--switch--devices. You can connect the device to the router directly, and the switch connecting to the router at the same time. (modem--router--devices...