@AleXSR700 Put in the US firmware version into the EU hardware may get the error "invalid file", there has a preset limit for the firmware of different versions. And it is also against the...

@JohnWhited Can you see the WAN 1 option before you reset and reconfigure? Also what is the firmware version of this router？ If not the latest one try to upgrade it. Reset again, use another browser...

@PaddyBoyFloyd 1. If you are sure that the EAP's firmware is compatible with the v4 Controller, then you can try to Ping the EAP's IP address on the PC with the software installed. If the PC can Ping...

@ursin It is possible to set up VLAN ID on the WAN side to dial up. Go to "Settings-Wired Network--Internet--WAN--Advanced Setting", then you will see the option VLAN.

@nutzich If the situation is A can not talk to B, but A and B can talk to C, then I think the port isolation on the controller can work as expected. The controller has no the same function on...

@AlejandroC You can go to CPE B's page, and click on Ping Tool on the CPE's management page, then Ping the IP of CPE C. If CPE B can Ping CPE C successfully, make sure that the TCP/IP rule for the...