@Vincent-TP If that is the case, this is actually great - and perhaps the same approach of adapted firmware first could also be expanded to routers and switches. Otherwise, the endless cycle of...

Ever since the very first 1.3.0 beta, then following on to 1.3.0 official, then 1.3.1, and now the 1.3.2 released on controller yesterday, my ER8411 temperature as reported to the controller is...

@Vincent-TP Upgraded all 8 of my EAP650 v1 just fine, no issues so far One question - why is it now stated "Adapted to omada controller v6" rather than 5.15 ? Is controller versions being re-done and...

This guide will show you how you can create stateful ACL rules with fine grained IP-Group and IP-Port Group control. Required: Omada Gateway and at least one Omada switch at the core of the network....

@Yunusck I think you are almost there 1) created vlan 10 in the switch with ports 1,3,4 untagged and port 8 tagged - port 8 should be untagged and PVID 10 so Access point managent IP resides on this...

@Pink_Waters yes! if the switch IP per vlan is NOT the clients gateway (as set by dhcp or static) then the router will be the first hop for that clients traffic (ie, its gateway) and then the router...