@Vincent-TP Yes, all L2+ / L3 switches No other DHCP in the vlan You can test this with just a controller and switch, no router needed Here is a good example Here are test switch DHCP settings Note...

@MR.S Well isnt that interesting! The ARP detection on the router kinda works for me, however if the device goes "quiet" for a while its IP disappears and never comes back, i only noticed this today....

What is really, REALLY crazy about this...... I dont think there is an actual hardware limitation with the switch...at all If you run them in standalone mode, with manually assigned VLANs and all the...

@Pungini If i am reading this right, you have two different uplink ports for each vlan to the firewall? On the AP side of things, it should be connected to a port with untagged vlan 1, tagged vlan...

@sparkles Is your NAS firewall (assuming it has one) blocking ICMP / ARP ? Since the controller is running on the nas, in a container, its subject to whatever filtering the NAS firewall is doing to...

Currently on Controller managed systems, DPI can only be set on "Networks" - ie, router interface VLANs There is no way to set the target to an IP group EG: Switch only vlans that are routed to and...