@KimcheeGUN Yes, once bypass mode is on, I've also tried to reset all the devices, anything from the TP router, starlink, omada controller, POE Switch. But there is still no connection even though...

Thanks for the reply @Clive_A So when I was troubleshooting I actually did connect the computer directly to the ER605 and unplugging all the AP's etc while Starlink was in bypass mode and I still had...

Hello! I recently replaced our router TP LINK ARCHER MR 600 to a TP LINK ER605 in my network setup to the following. STARLINK - ER605 - SG1005LP 5 Port POE Switch - EAP 225 (AC1200) - Omada...

Greetings! Straight to the point, we have a setup at a hotel and restaurant in which for some reason a hand full of guests can't connect to our network unless It is rebooted. There are no kind of...

Hello, Recently did a hardware upgrade and got a MR600, TP 9 Switch POE for our setup that has 4 different AP's Current issue is that all AP's connections seems to be limited to 10mbps (negotiated...

@d0ugmac1 SOLVED! Yes thank you! This corrected the problem! However for some reason It only improved some of the access points, will have to double check on this Much appriciated!