Hi,@MaartenMechanic Great to hear that your issue has been successfully resolved. Generally speaking, the time zone configuration of the controller will not cause unstable connection to the Omada...

Hi, @blitzlee06 If you require an SSID that operates only on the 2.4G band or only on the 5G band, you will need to create separate SSIDs for each band individually. If you select both 2.4G and 5G...

Hi,@UgurKasikci To better assist you, I've created a support ticket via your registered email address. Please check your email box and ensure the support email is well received. Thanks!

Hi, @blitzlee06 Thank you for posting on our business forum. Please create a test SSID for your EAP via the controller, and do not configure any authentication-related settings for this test SSID....

Hi, @3dat_Peter Thank you for posting on our business forum. We noticed that your current topology for ONT2: ONT2 <-> SG2008 (VLAN 2, Access, PVID 2) <- (Trunk) -> SG2210P (VLAN 2, Access, PVID 2)...

Hi,@gemidi89 Thank you for posting on our business forum. The EAP670 only has one Ethernet port and this port needs to be connected to the upsteam device. When you mentioned that clients are not...