@RampantDespair yes and no, I don't know which VPN you have configured, is it site to site IPsec you can do that but you have to create a VLAN and select this VLAN for the ports, then you set up the...

@IMV8N first, backup the controller from the Omada console then SSH into the raspberry pi and run these commands from the console. sudo -s cd /tmp wget...

@CostinR1 OpenVPN is pretty straight forward, you need 1. public ip on the router's wan interface 2. make sure you don't have overlapping lans, I see you do. vpn ip pool should not be the same as any...

@someguy1234 I hadn't double-clicked the port, but now it works again

@someguy1234 you can look at this link, i used it for a while but then it stopped working at some point and i haven't gotten it to work again, but it's possible i did something wrong somewhere. i...

@GRL it was cool that you can block the Gateway Management Page on the WAN interface too, I didn't know that. learn something new every day :-) This way I can also ensure that the VPN cannot connect...