@TW_EPC you can look at PPSK, it will solve your problem, you can also create many ssid in a wlan group then turn off unwanted ssid on each access point go to access point propperty, config and wlans

@TW_EPC Hard to say since I don't know anything about your solution, but why use a separate VLAN for each hall? It just becomes a mess anyway when you roam between VLANs you get problems with IP...

@TW_EPC You cant Roam between wlan group. Thats why you have to Authenticator for every group.

@Aveamantium If you have a non-Omda switch in your network, something like this will happen. You won't get a proper map, sometimes the network will split up completely, so I recommend you replace the...

@BOBYman I did a test here with an EAP225 5.1.7 Build 20240819 Rel. 44148, everything is auto except Channel Width, here is the result. it was better than I thought. channel is 11 Auto 20 Mhz 40 Mhz...

@BOBYman 60Mbps is probably what you can expect on 2.4 Ghz with this access point. wifi4 is old and outdated. try and use 5Ghz or upgrade to wifi6, with wifi6 on 2.4ghz and 40mhz bandwidth my access...