@Philbert Thanks for your fast reply and the hint. Our Ap's are all in the same WLAN group in Omada, there the Tags are set properly. All AP's are connected to trunk-ports on our switch's with all...

We still have trouble with our new EAP235-wall. Lukily we bought just one to try and didn't replace directly all of our old eap115-wall/eap225-wall. We learned already that the new chip-set is not...

@John1234 I made a Video to assist the description. The Video starts right after powering the tl-sg2210p with it's PSU. You see how it boots up and shows link to the connected client (Port 2) On 0:19...

@John1234 Thx for your reply. I connect the TL-SG2210 to it's PSU and wait until the switch is booted. Then I connect the switch to the Uplink-Switch and the TL-Sg 2210 turns immediately totally off...

We have here a TL-SG2210P V1 It was working fine for quite a while as desktopswitch on a SFP-Fiber-uplink. Now we had to switch to RJ45 due to Maintenance of the fiber and the switch just stopped...

@data021 Unfortunately yes. After I had contact to the English and the German mail-support for days now and moved the EAP to our DMZ and offered them access for live diagnosis, I got finally an...