@Robuck Ok, I see. While you run a speedtest, can you please check the relation between the Ookla speeds of your laptop and the "link speeds" shown by the BE550? (in the "Clients" menu click the "v"...

@aurel220 Hi, Resetting the device will also unbind the device. So, after a reset you have to bind it again. In case you are already trying to bind it, but it fails, then please post the error...

@Mads123 Hi, It depends on which LED is not on. If the "Powerline" LED is off (the one with the pictogram), then either the two Powerline adapters are not paired or the distance between the two is...

Robuck wrote I have played around with the channel width and ultimately settled on 20/40/80Mhz for the 5G band as it appeared to be more stable. It should be noted my VM hub 5 is also using the same...

@Kotton Hi, Just to recap. You are saying that if you tell the NAS to open ports 80 and 443 for that identical IP address on the AX55 Pro via UPnP, then ports 80 and 443 show up as being forwarded in...

@ThomCarlsson Hi, If you are using the Tether app to change the wireless security and it doesn't work, then try it via the router's web management interface instead.